JVC GR-D70, GR-D90 Memory card cannot be played back, LCD monitor image is distorted

Page 40

A memory card cannot be played back.

• The Power Switch y is set to “ ” or “ ”.

¥Set the Power Switch y to “PLAY” ( pg. 18).

• The VIDEO/DSC Switch 4 is set to “VIDEO”.

¥Set the VIDEO/DSC Switch 4 to “DSC”.

The LCD monitor image is distorted.

•During playback of the unrecorded portion, High-speed Search and still playback, LCD monitor indications appear distorted. This is not a defect.

Images on the LCD monitor are jittery.

•The speaker volume is too great.

¥Turn the speaker volume down ( pg. 14).

The charger indicator on the camcorder does

not light.

•The temperature of the battery is extremely high/low.

•Charging is difficult in places subject to extremely high/low temperatures.

¥To protect the battery, it is recommended to charge

it in places with a temperature of 10°C to 35°C (50°F to 95°F) ( pg. 41).

When the image is printed from the printer, a

black bar appears at the bottom of the screen.

•This is not a malfunction.

¥By recording with “DIS” activated ( pg. 29) this can be avoided.

There is no playback picture on the

connected TV.

•Since the analog input mode is engaged, the camcorder is in the Record-Standby mode.

¥Set “S/AV INPUT” to “OFF” in the Menu Screen ( pg. 31).

When the camcorder is connected via the DV

connector, the camcorder does not operate.

•The DV cable was plugged/unplugged with power turned on.

¥Turn the camcorder’s power off and on again, then operate it.

Blocks of noise appear during playback, or there is no playback picture and the screen becomes blue.

¥Clean the video heads with an optional cleaning cassette ( pg. 42).

The LCD monitor, the viewfinder and the lens

have become dirty (ex. fingerprints).

¥Wipe them gently with soft cloth. Wiping strongly can cause damage ( pg. 43).

An unusual mark appears.

¥Check the section of the manual that explains LCD monitor/viewfinder indications ( pg. 48 – 51).

An error indication (E01, E02 or E06) appears.

•A malfunction of some kind has occurred. In this case the camcorder’s functions become unusable.

¥Remove the power supply (battery pack, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains even though you repeat the above two or three times, please consult your nearest JVC dealer. Do not eject the cassette. This will cause damage to the tape.

An error indication (E03 or E04) appears.

•A malfunction of some kind has occurred. In this case the camcorder’s functions become unusable.

¥Eject the cassette once and re-insert it, then check if the indication clears. When it does, you can resume using the camcorder. If the indication remains even though you repeat the above two or three times, please consult your nearest JVC dealer.

The memory card cannot be removed from

the camcorder.

¥Push in the memory card a few more times ( pg. 11).

EN

40 TROUBLESHOOTING

Page 39 Page 41
Image 40
Page 39 Page 41
Contents GR-D90 GR-D70 GR-D30 Contents Safety Precautions Important Product Safety Instructions Before recording an important sceneCore Filter Make sure the arrow is Pointing upwardWind once StopperSub Menu Power Charging the Battery PackUsing the Battery Pack Using AC PowerGrip Adjustment Viewfinder AdjustmentLithium-ion is vulnerable in colder temperatures About BatteriesApproximate recording time Tape Recording mode Shoulder Strap AttachmentTripod Mounting Loading/Unloading a CassetteDate/Time Settings Recording Mode SettingRETURN, and press it twice. The Menu Screen closes Screen closesLoading a Memory Card Picture Quality/Image Size Setting To Unload a Memory CardLabel Clipped edge Memory card DisplayBasic Recording To Adjust The Brightness Of The DisplayTape Recording Operation Mode Power-Linked OperationJournalistic Shooting Self-RecordingTo Control The Speaker Volume Time CodeNormal Playback Recording from the Middle of a TapeTo cancel Blank Search midway Blank SearchPress Blank Search PressConnections If using a VCR . . . go to step If not . . . go to stepDate/Time Set DATE/TIME to AUTO, on or OFF Basic Shooting Snapshot To Delete Unwanted Still ImagesTo Remove The Shutter Sound To Protect Valuable Files available only for SD Memory CardApproximate Number of Storable Images MultiMediaCardTo Magnify The Stored Images EN Memory Card RecordingAuto Playback Viewing File InformationIndex Playback Removing On-Screen DisplayProtecting Files Deleting Files EN Advanced FeaturesTo Remove Protection Setting Print Information Dpof Setting Advanced Features ENDubbing Still Images Recorded On a Tape To a Memory Card To Print ALL Still Images ONE Print for EachTo Reset The No. Of Prints Making a New FolderInitializing a Memory Card Folder and File namesNight-Alive Program AE With Special EffectsFade/Wipe Effects Snapshot Mode Selection Snapshot For Tape RecordingSnapshot Recording Auto FocusManual Focus Exposure ControlTo Return To Automatic Exposure Control To Brighten The Subject QuicklyIris Lock White Balance AdjustmentManual White Balance Operation WIPE/FADER Program AEExposure BalanceManual SystemCamera Display For Playback Menu VideoClock ADJ Quality , Image Size12BIT Mode Video DisplayDisplay Playback SoundDubbing To Or From a VCR To Use This Camcorder As a PlayerTo Use This Camcorder As a Recorder DubbingTo DV @ Core filter DV cable Optional Core filter To DVUsing the Remote Control Unit EN Slow-Motion PlaybackFrame-By-Frame Playback Playback Special EffectsSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg EN Using the Remote Control UnitAudio Dubbing Insert EditingUsing USB cable GR-D90/D70 only Using DV cableUsing USB cable B Using DV cable GR-D90/D70 only Connection To a Personal ComputerNo power is supplied Focus does not adjust automaticallySnapshot mode cannot be used Image taken using Snapshot is too darkIndicators and the image color on LCD monitor are not clear Black & White Fader does not workWhite Balance cannot be activated Date/time does not appearCharger indicator on the camcorder does Not light An error indication E01, E02 or E06 appearsAn error indication E03 or E04 appears Memory card cannot be played backUsing Household AC Plug Adapter Battery PacksAC Adapter CassettesLCD Monitor Main UnitHow to handle a CD-ROM For Your MaintenanceCleaning The Camcorder After UseTrade Name Responsible partyAddress Telephone NumberConnectors CamcorderGeneral Digital Video CameraIndex Controls, Connectors And IndicatorsLCD monitor Speaker Viewfinder VIDEO/DSC Switch VIDEO, DSC GR-D90/D70 only Fast-Forward Button USB Universal Serial Bus ConnectorPower Switch Battery Release Button BATT. Release .... pgLCD Monitor/Viewfinder Indications During Memory Card Recording Only GR-D90/D70 onlyDuring Memory Card Playback GR-D90/D70 only 1024 During Both Tape And Memory Card RecordingAppears when in the Squeeze or Cinema mode Displays the sound mode for approx secondsAppears when Digital Image Stabilizer DIS is Appears when the focus is adjusted manuallyHigh E03 or E04 Unit in Safeguard Mode Eject E01, E02 or E06 Unit in Safeguard ModeAppears if a file in another format is selected Terms VIDEO/DSC Switch Position Record-StandbySD Memory Card Unload a TapeMemo Memo US 1102-HO-UN-PJ
Top Page Image Contents