JVC GR-D70 Connection To a Personal Computer, Using USB cable GR-D90/D70 only, Using DV cable

Page 37

Connection To A Personal Computer

[A] Using USB cable (GR-D90/D70 only)

This camcorder can transfer still images to a PC via USB connection.

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 For GR-D90/D70 Owners: If you are using the USB connection, set the VIDEO/DSC switch 4 to “DSC”.

4 Turn the camcorder’s Power Switch y to “PLAY” while pressing down the Lock Button t located on the switch and turn on the PC.

Refer to the instruction manual of the software on how to transfer a still image to the PC.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the installation of the bundled software and drivers.

It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 7).

Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

The date/time information cannot be captured into the PC.

Refer to the instruction manuals of the PC and Software.

The still images can also be transferred to a PC with a DV connector-equipped capture board.

When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depend- ing on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

The system may not work properly depending on the PC or capture board you are using.

When using the DV connection refer to manufacturer instructions of your capture board for driver’s installation and operation instructions.

“ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.

[A] Using USB cable [B] Using DV cable (GR-D90/D70 only)

y

 

OFF (CHARGE)

4

PLAY

 

To USB 9

To DV @

OR

Core filter

USB cable

DV cable

(provided)

(optional)

 

Core filter

To USB

To DV

connector

connector

PC

PC with DV

 

connector

EN

SYSTEM CONNECTIONS 37

Image 37
Contents GR-D90 GR-D70 GR-D30 Contents Safety Precautions Before recording an important scene Important Product Safety InstructionsMake sure the arrow is Pointing upward Core FilterWind once StopperSub Menu Charging the Battery Pack PowerUsing the Battery Pack Using AC PowerViewfinder Adjustment Grip AdjustmentLithium-ion is vulnerable in colder temperatures About BatteriesShoulder Strap Attachment Approximate recording time Tape Recording modeTripod Mounting Loading/Unloading a CassetteRecording Mode Setting Date/Time SettingsRETURN, and press it twice. The Menu Screen closes Screen closesTo Unload a Memory Card Loading a Memory Card Picture Quality/Image Size SettingLabel Clipped edge Memory card DisplayBasic Recording To Adjust The Brightness Of The DisplayTape Recording Power-Linked Operation Operation ModeJournalistic Shooting Self-RecordingTime Code To Control The Speaker VolumeNormal Playback Recording from the Middle of a TapeBlank Search To cancel Blank Search midwayPress Blank Search PressConnections If using a VCR . . . go to step If not . . . go to stepDate/Time Set DATE/TIME to AUTO, on or OFF To Delete Unwanted Still Images Basic Shooting SnapshotTo Remove The Shutter Sound To Protect Valuable Files available only for SD Memory CardMultiMediaCard Approximate Number of Storable ImagesTo Magnify The Stored Images EN Memory Card RecordingViewing File Information Auto PlaybackIndex Playback Removing On-Screen DisplayProtecting Files Deleting Files EN Advanced FeaturesTo Remove Protection Advanced Features EN Setting Print Information Dpof SettingDubbing Still Images Recorded On a Tape To a Memory Card To Print ALL Still Images ONE Print for EachMaking a New Folder To Reset The No. Of PrintsInitializing a Memory Card Folder and File namesProgram AE With Special Effects Night-AliveFade/Wipe Effects Snapshot For Tape Recording Snapshot Mode SelectionSnapshot Recording Auto FocusExposure Control Manual FocusTo Return To Automatic Exposure Control To Brighten The Subject QuicklyIris Lock White Balance AdjustmentManual White Balance Operation Program AE WIPE/FADERExposure BalanceSystem ManualCamera Display Video For Playback MenuClock ADJ Quality , Image SizeVideo Display 12BIT ModeDisplay Playback SoundTo Use This Camcorder As a Player Dubbing To Or From a VCRTo Use This Camcorder As a Recorder DubbingDV cable Optional Core filter To DV To DV @ Core filterSlow-Motion Playback Using the Remote Control Unit ENFrame-By-Frame Playback Playback Special EffectsEN Using the Remote Control Unit Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing Insert EditingUsing DV cable Using USB cable GR-D90/D70 onlyUsing USB cable B Using DV cable GR-D90/D70 only Connection To a Personal ComputerFocus does not adjust automatically No power is suppliedSnapshot mode cannot be used Image taken using Snapshot is too darkBlack & White Fader does not work Indicators and the image color on LCD monitor are not clearWhite Balance cannot be activated Date/time does not appearAn error indication E01, E02 or E06 appears Charger indicator on the camcorder does Not lightAn error indication E03 or E04 appears Memory card cannot be played backBattery Packs Using Household AC Plug AdapterAC Adapter CassettesMain Unit LCD MonitorFor Your Maintenance How to handle a CD-ROMCleaning The Camcorder After UseResponsible party Trade NameAddress Telephone NumberCamcorder ConnectorsGeneral Digital Video CameraIndex Controls, Connectors And IndicatorsLCD monitor Speaker Viewfinder Fast-Forward Button USB Universal Serial Bus Connector VIDEO/DSC Switch VIDEO, DSC GR-D90/D70 onlyPower Switch Battery Release Button BATT. Release .... pgDuring Memory Card Recording Only GR-D90/D70 only LCD Monitor/Viewfinder IndicationsDuring Memory Card Playback GR-D90/D70 only 1024 During Both Tape And Memory Card RecordingDisplays the sound mode for approx seconds Appears when in the Squeeze or Cinema modeAppears when Digital Image Stabilizer DIS is Appears when the focus is adjusted manuallyHigh E03 or E04 Unit in Safeguard Mode Eject E01, E02 or E06 Unit in Safeguard ModeAppears if a file in another format is selected Terms Record-Standby VIDEO/DSC Switch PositionSD Memory Card Unload a TapeMemo Memo US 1102-HO-UN-PJ