JVC GR-D90 Slow-Motion Playback, Frame-By-Frame Playback, Playback Special Effects, Playback Zoom

Page 35

Make sure “REMOTE” in the SYSTEM Menu is set to “ON” ( pg. 30) and the remote control is pointed at the remote sensor 1. The transmitted beam’s approximate effective distance for indoor use is 5m (16ft).

Slow-Motion Playback

To allow slow-speed search in either direction during tape playback.

1 To change from normal to Slow-Motion Playback, press SLOW (9) U or (0) g more than approx. 2 seconds. After approx. 5 minutes (approx. 20 seconds with an 80-minute cassette) in Slow Rewind or approx. 5 minutes in Slow Forward, normal playback resumes.

To stop Slow-Motion Playback, press PLAY (4) j.

NOTES:

●You can also engage Slow-Motion Playback from Still Playback by pressing SLOW U g more than approx.

2 seconds.

●During Slow-Motion Playback, due to digital image processing, the picture may take on a mosaic effect.

●After SLOW (9) U or (0) g is pressed and held, the still image may be displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction.

●There may be a small margin between the slow-motion playback start point you chose and the actual start point for Slow-Motion Playback.

●During Slow-Motion Playback, there will be disturbances in video and the picture may seem unstable, especially with steady images. This is not a malfunction.

●During Slow-Motion Playback, press PAUSE (6) Y to pause playback.

E

Rs

T Y

9

6

0

f d

U

 

 

 

h

g

I

2

4

3

j

O

w

5

e

k

P

 

 

 

l

a

 

T

 

;

 

W

 

 

A

Frame-By-Frame Playback

To allow frame-by-frame search during tape playback.

1 To change from normal to Frame-By-Frame Playback, press SLOW (0) g repeatedly for forward or SLOW (9) U repeatedly for reverse. Each time it is pressed, the frame is played back.

NOTE:

You can also engage Frame-By-Frame Playback from Still Playback by pressing SLOW (9) U or (0) g repeatedly.

Playback Special Effects

To allow you to add creative effects to the playback image.

1 To start playback, press PLAY (4) j.

2 Point the remote control at the camcorder’s remote sensor and press EFFECT f. The PLAYBACK EFFECT Select Menu appears.

3 Move the highlight bar to the desired effect by pressing EFFECT f. The selected function is activated and after 2 seconds the menu disappears.

To deactivate the selected effect, press ON/OFF d on the remote control. Pressing it again re-activates the selected effect.

To change the selected effect, repeat from step 2 above.

NOTE:

The effects that can be used during playback are Classic Film, Monotone, Sepia and Strobe. The effects work the same in playback as they did in recording. Refer to page 23, 24 for more information.

Playback Zoom

To magnify the recorded image up to 44X at any time during playback.

1 Press PLAY (4) j to find the scene of interest.

2 Press the Zoom Button T ; or W A on the remote control. Make sure the remote control is pointed at the camcorder's remote sensor. Pressing T ; zooms in.

3 You can move the image on screen around to find a particular portion of the picture. While holding down SHIFT a, press * (Left) I, T(Right) h, ^ (Up) Y and & (Down) P.

To end zoom, press and hold W A until magnification returns to normal. Or, press STOP (5) P and then press PLAY (4) j.

NOTES:

●Zoom can also be used during slow-motion and still playback.

●Due to ditital image processing, the quality of the image may suffer.

Normal playback

 

Press T ;

 

 

 

To move image, press T (Right) h while keeping SHIFT a held down.

USING THE REMOTE CONTROL UNIT EN

(GR-D90 and GR-D70 only) 35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents GR-D90 GR-D70 GR-D30 Contents Safety Precautions Before recording an important scene Important Product Safety InstructionsMake sure the arrow is Pointing upward Core FilterSub Menu StopperWind once Using AC Power PowerCharging the Battery Pack Using the Battery PackAbout Batteries Grip AdjustmentViewfinder Adjustment Lithium-ion is vulnerable in colder temperaturesLoading/Unloading a Cassette Approximate recording time Tape Recording modeShoulder Strap Attachment Tripod MountingScreen closes Date/Time SettingsRecording Mode Setting RETURN, and press it twice. The Menu Screen closesDisplay Loading a Memory Card Picture Quality/Image Size SettingTo Unload a Memory Card Label Clipped edge Memory cardTape Recording To Adjust The Brightness Of The DisplayBasic Recording Self-Recording Operation ModePower-Linked Operation Journalistic ShootingRecording from the Middle of a Tape To Control The Speaker VolumeTime Code Normal PlaybackPress To cancel Blank Search midwayBlank Search Press Blank SearchDate/Time Set DATE/TIME to AUTO, on or OFF If using a VCR . . . go to step If not . . . go to stepConnections To Protect Valuable Files available only for SD Memory Card Basic Shooting SnapshotTo Delete Unwanted Still Images To Remove The Shutter SoundEN Memory Card Recording Approximate Number of Storable ImagesMultiMediaCard To Magnify The Stored ImagesRemoving On-Screen Display Auto PlaybackViewing File Information Index PlaybackTo Remove Protection EN Advanced FeaturesProtecting Files Deleting Files To Print ALL Still Images ONE Print for Each Setting Print Information Dpof SettingAdvanced Features EN Dubbing Still Images Recorded On a Tape To a Memory CardFolder and File names To Reset The No. Of PrintsMaking a New Folder Initializing a Memory CardProgram AE With Special Effects Night-AliveFade/Wipe Effects Auto Focus Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingTo Brighten The Subject Quickly Manual FocusExposure Control To Return To Automatic Exposure ControlManual White Balance Operation White Balance AdjustmentIris Lock Balance WIPE/FADERProgram AE ExposureSystem ManualCamera Display Quality , Image Size For Playback MenuVideo Clock ADJPlayback Sound 12BIT ModeVideo Display DisplayDubbing Dubbing To Or From a VCRTo Use This Camcorder As a Player To Use This Camcorder As a RecorderDV cable Optional Core filter To DV To DV @ Core filterPlayback Special Effects Using the Remote Control Unit ENSlow-Motion Playback Frame-By-Frame PlaybackInsert Editing Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgEN Using the Remote Control Unit Audio DubbingConnection To a Personal Computer Using USB cable GR-D90/D70 onlyUsing DV cable Using USB cable B Using DV cable GR-D90/D70 onlyImage taken using Snapshot is too dark No power is suppliedFocus does not adjust automatically Snapshot mode cannot be usedDate/time does not appear Indicators and the image color on LCD monitor are not clearBlack & White Fader does not work White Balance cannot be activatedMemory card cannot be played back Charger indicator on the camcorder does Not lightAn error indication E01, E02 or E06 appears An error indication E03 or E04 appearsCassettes Using Household AC Plug AdapterBattery Packs AC AdapterMain Unit LCD MonitorAfter Use How to handle a CD-ROMFor Your Maintenance Cleaning The CamcorderTelephone Number Trade NameResponsible party AddressDigital Video Camera ConnectorsCamcorder GeneralLCD monitor Speaker Viewfinder Controls, Connectors And IndicatorsIndex Battery Release Button BATT. Release .... pg VIDEO/DSC Switch VIDEO, DSC GR-D90/D70 onlyFast-Forward Button USB Universal Serial Bus Connector Power Switch1024 During Both Tape And Memory Card Recording LCD Monitor/Viewfinder IndicationsDuring Memory Card Recording Only GR-D90/D70 only During Memory Card Playback GR-D90/D70 onlyAppears when the focus is adjusted manually Appears when in the Squeeze or Cinema modeDisplays the sound mode for approx seconds Appears when Digital Image Stabilizer DIS isHigh Appears if a file in another format is selected E01, E02 or E06 Unit in Safeguard ModeE03 or E04 Unit in Safeguard Mode Eject Terms Unload a Tape VIDEO/DSC Switch PositionRecord-Standby SD Memory CardMemo Memo US 1102-HO-UN-PJ
Top Page Image Contents