MasterPage: Left 
12 EN GETTING STARTED |
|
Attaching the Core Filter | How to Use the Audio Extension Cable |
Attach the core filters to the cables. The core filter reduces interference.
1 Release the
stoppers on both ends of the core filter.
2 Run the cable
When using optional headphones or external microphone, connect to the provided audio extension cable (with a core filter attached), then connect the audio extension cable to the camcorder. The core filter reduces interference.
through the core
Stopper
filter, leaving approx. 3 cm of cable between the cable plug and the core filter.
Headphones
Microphone
S-Video/Audio/Video cable
3 cm | Core filter (small) | ||
| |||
|
|
|
|
Core Filter* | To MIC |
USB cable, power cord (only for
Wind the cable once around the outside of the core filter as shown in the illustration.
Audio Extension Cable (provided)
To
Open the cover.
3 cm
Core filter (large: USB cable and
power cord, small: audio extension cable and AC adapter’s cord)
Wind once.
*Attach two core filters to the audio extension cable for headphones.
LCD Monitor
Pull on the end 
of the LCD monitor and open the LCD monitor fully. It can rotate 270°.
90° | 180° |
●When attaching to the power cord, attach the core filter near the end which is connected to the AC adapter.
●Wind the cable so that it is not slack.
3 Close the core filter until it clicks shut.
USB cable, power cord, | |
audio extension cable | |
cable | and AC adapter’s cord |
NOTES:
●Take care not to damage the cable.
●When connecting a cable, attach the end with the core filter to the camcorder.
You can also turn the LCD monitor over and move it back to the camcorder body with its monitor facing out.