JVC GR-X5EE, GR-X5EK manual Initialising a Memory Card, To print using the Dpof setting

MasterPage: Left GR-X5PAL.book Page 32 Thursday, April 7, 2005 7:23 PM

32 EN ADDITIONAL FEATURES FOR D.S.C.

To print using the DPOF setting					Initialising a Memory Card
If the printer is compatible with DPOF, you can
use the DPOF setting. ( pg. 30)
				You can initialise a memory card any time.
1 Perform steps 1 – 3 in “Normal Playback of
				After initialising, all files and data stored in the
Images” ( pg. 26).				memory card, including those which have been
2 Press MENU. The menu screen appears.				protected, are cleared.
				1 Set the VIDEO/MEMORY switch to
3 Press Up (	4 9	8	) to select
	/ ) or Down (			“MEMORY”.
“DIRECT PRINT”, and press SET. A message
“PLEASE CONNECT PRINTER” appears.				2 Set the power switch to “PLAY” while
4 Connect the camcorder to the printer with				pressing down the lock button located on the
USB cable.				switch.
● After a while, the print menu appears.				3 Press MENU. The menu screen appears.
5 Press Up (4/9) or				4 Press Up (		4 9	) or		FORMAT
Down (8) to select “DPOF			DIRECT PRINT			/
				8
PRINT”, and press SET.				Down ( ) to select				ERASE ALL
				“FORMAT”, and press
								EX I ST I NG DATA?
6 Press Up (	4 9		SELECTED PRINT	SET. The FORMAT
	/ ) or			screen appears.
8			DPOF PRINT
									EXECUTE
Down ( ) to select				5 Press Up (
“PRINT”, and press SET.			CANCEL			4 9	) or		RETURN
The image is printed.						/
				8
● To confirm the DPOF setting, select “CHECK				Down ( ) to select
				“EXECUTE”, and press SET. The memory card
SETTINGS”, and press SET. You can check				is initialised.

images and number of prints by pressing 3 or	● When initialization is finished, “NO IMAGES
5. To return to the previous menu, press Up
	STORED” appears.
(4/9) or Down (8) to select “RETURN”, and
	● To cancel initialization, select “RETURN”.
press SET.

NOTE:	CAUTION:
	Do not perform any other operation (such as turning
If the printer is not recognised, or to print again after
	off the camcorder) during initialization. Also, be sure
direct printing with a PictBridge Printer, remove the
	to use the provided AC adapter, as the memory
USB cable, select “DIRECT PRINT” in the menu
	card may be corrupted if the battery becomes
again, and then reconnect the cable.
	exhausted during initialization. If the memory card
	becomes corrupted, initialise it.