JVC GR-X5EE, GR-X5EK manual Audio Dubbing, To hear the dubbed sound during playback

MasterPage: Left GR-X5PAL.book Page 50 Thursday, April 7, 2005 7:23 PM

50 EN		EDITING
	Audio Dubbing					NOTES:
						● When editing onto a tape that was recorded at
The audio track can be customized only when						12-BIT, the old and new soundtracks are recorded
recorded in the 12-BIT and SP modes.						separately.
						● If you dub onto a blank space on the tape, the
( pg. 34)
						sound may be disrupted. Make sure you only edit
● Use the provided remote control.
						recorded areas.
	Stereo Microphone					● If feedback or howling occurs during TV playback,
						move the camcorder’s microphone away from the
					PAUSE	TV, or turn down the TV’s volume.
						● If you change from 12-BIT to 16-BIT in mid-
					PLAY	recording and then use the tape for audio
					STOP	dubbing, it is not effective from the point where
					A.DUB
						16-BIT recording began.
				Microphone connector		● During audio dubbing, when the tape moves to
						scenes recorded in the LP mode, scenes
						recorded in 16-BIT audio or a blank portion, audio
Speaker			Headphone connector			dubbing stops.
						● Audio dubbing is also possible using an optional
1 Play back the tape to locate the point where						microphone connected to the microphone
						connector.
editing will start, then press PAUSE (9).						● While an optional microphone is connected, the
2 While holding A. DUB (D) on the remote						built-in microphone is disabled.
						● To perform audio dubbing with a video unit
control, press PAUSE (9). The “9D” and “MIC”
						connected to the camcorder’s S/AV connector,
indicators appear.
						first set “S/AV INPUT” to “A/V IN” or “S IN” in
3 Press PLAY (U), then begin “narrating”.
						VIDEO menu. ( pg. 33, 38)
Speak into the microphone on the camcorder.						The “AUX” indication appears instead of “MIC”.

●To pause dubbing, press PAUSE (9).

4 To end audio dubbing, press PAUSE (9), then STOP (8).

To hear the sound during audio dubbing Connect optional headphones to the headphone connector or use the S/AV connector, and set the “NARRATION” to the desired mode

(
pg. 33, 37);

●“OFF” for the playback sound.

●“ON” for the dubbed sound.

●“MIX” for the playback and dubbed sound.

To hear the dubbed sound during playback

Set “NARRATION” to “ON” or “MIX”.

(
pg. 33, 37)