JVC GR-AX940 After Use, Cleaning The Camcorder, Clean Lens, Remove Eyepiece, RE-ATTACH Eyepiece

Page 44

44EN

USERMAINTENANCE

LENS COVER Open/Close Ring

BATTERY RELEASE

Set to “POWER OFF”.

Remove.

PUSHEJECT

NOTES:

After Use

1 Set the Power Switch to “POWER OFF” to turn off the camcorder.

2 Slide EJECT to open the cassette holder, then remove the cassette.

3 Close and lock the cassette holder by pressing PUSH.

4 Slide BATTERY RELEASE to remove the battery pack.

5 Turn the LENS COVER Open/Close Ring to close the lens cover.

Cleaning The Camcorder

1 CLEAN EXTERIOR Wipe gently with a soft cloth.

•Put cloth in diluted mild soap and wring it well to wipe off heavy dirt, then wipe again with a dry cloth.

2 CLEAN LENS

Blow it with a blower brush, then wipe it gently with lens cleaning paper.

3 REMOVE EYEPIECE

Turn the eyepiece counterclockwise and pull it out.

4 CLEAN VIEWFINDER Remove dust using a blower brush.

5 RE-ATTACH EYEPIECE

Re-attach the eyepiece and turn it clockwise.

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mold may form if the lens is left dirty.

●When using a cleaner or chemically treated cloth, refer to the cautions that came with it.

●When removing the eyepiece, be sure to hold the viewfinder securely.

Image 44

Contents GR-AX940 For Customer UseFor clock operation Dear CustomerIt is recommended that you Power Sources Power Cord ProtectionPower Lines Grounding or PolarizationAccessories CleaningDamage Requiring Service Replacement PartsUsing the battery pack To remove the battery packSlide Battery Release and pull out the battery pack For more detailsLithium Battery CR2025 x 1DC Cord for clock operation ZoomZoom out Cassette AdapterContents Power Supply PowerAttach Battery Pack Detach Battery PackCharge Marker DischargedClock Lithium Battery Insertion/Removal Switch OFF PowerRemove Battery Holder Insert Battery in HolderDate/Time Settings Recording Mode Setting Tape Length SettingSET Recording Mode ContLoading/Unloading a Cassette Open Cassette HolderINSERT/REMOVE Cassette Close Cassette HolderGrip Adjustment Viewfinder AdjustmentAdjust Length Shoulder Strap AttachmentTripod Mounting Attach StrapPower Switch Position Basic RecordingLoad a Cassette Start ShootingPress Display Button Viewfinder IndicationsStop Recording EN Recording Basic Features Push the Power Zoom Lever towards TFeature Quick Review To check the end of the last recordingPress P. STABILIZER. appears Basic FeaturesFeature Picture Stabilizer Feature Video Light To brighten the scene when natural lighting is too dimWhen not using the video light, turn it off to save Battery powerRecording Advanced Features SnapshotTake Snapshot If you press during Record-StandbyStart or END Recording Fade/WipeModeengage FADE- or WIPE-STANDBY Advanced Features Select ModeProgram AE With Special Effects Press P.AE to cycle through the modes as shown on the leftSepia SportsND Effect Nega/Posi Negative/PositiveDate/Time Insert Press the Select Dial to display the Menu ScreenAccess Title Menu Select the Desired ModeInstant Titles RETURN. Then press the Select Dial to close Menu ScreenEND Setting Using Menu For Detailed AdjustmentMake Setting Menu Screen Available Using The Select Dial Menu Screen Available Using The Menu ButtonTally lamp comes on to signal the start of recording Demo Mode is set to on and the Menu Screen is closedAllows you to set the current date and time pg Recording pgAccess Exposure Menu Access Manual ExposureAdjust Exposure END Adjustment of ExposureFocusing Patterns that are regularly repeatedAccess Focus Menu Access Manual FocusAdjust Focus END Adjustment of FocusWhite Balance Adjustment Access White Balance AdjustmentSET Function Parameters To Return To Automatic White BalanceEnter Setting Manual White Balance OperationSET Manual White Balance To Change The Tint For RecordingSelf-Timer Access INT. Time MenuStart Delayed Recording To Cancel Self-TimerAnimation Time-LapsePlayback Basic Playback Rewind or Fast-Forward the tapePlay Back Stop PlaybackTracking Activate Manual TrackingPlayback Features Feature Still PlaybackFeature Shuttle Search Feature Counter Memory FunctionCassette Adapter VHS Playpak Using The Cassette Adapter EN41Insert Battery When connecting the cables, open this cover Basic Connections And Tape DubbingBasic Connections Connection For Tape DubbingTape Dubbing Cleaning The Camcorder Clean LensAfter Use Remove EyepieceNo power is supplied Recording does not startAnimation or Time-Lapse is not AvailableReview or Retake mode An error number i.e. E03 appearsDuring recording, the indications do not appear Tape will not ejectWhite Balance Mode Indicator Clock Battery WarningTape Remaining Time Displayed and the tape remaining time warning48EN Video Light Switch Power Switch Battery Release SwitchDC in Jack Connectors w to r are located beneath the cover Tally Lamp Power LampIndex Terms Pg , 9When using the AC Power Adapter/Charger in areas To prevent damage and prolong service lifeOther than the USA To avoid hazardFor safety, do not Avoid using the unitDuring use Store cassettesGeneral ConnectorsProvided Accessories Optional Accessories Alimentación AlimentacionColocacion DE LA Bateria Indicador de cargaPara extraer la batería Deslice Battery Release y extraiga la bateríaUtilización de la batería EN for Servicing Only in U.S.A Warranty Only in U.S.A. EN57 Memo Memo GR-AX940