JVC GR-AX940 manual Charge Marker, Discharged

Page 9

EN9

 

Charge Marker

Charge marker

A charge marker is provided on the battery pack to

 

help you remember whether it has been charged or

 

not. Two colors are provided (red and black)—you

 

choose which one means charged and which means

 

discharged.

NOTES:

●The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time.

●Charging times noted on page 8 are for a fully discharged battery pack, and discharging times are for a fully charged battery pack.

●Charging and discharging times vary according to the ambient temperature and the status of the battery pack.

●Remember to set the charge marker after charging a battery pack or after detaching a discharged one from your camcorder.

●Perform the REFRESH function after no less than 5 chargings.

●While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does not charge the battery. When discharging is complete, detach the battery from the AC Power Adapter/ Charger to store it.

●High temperatures can damage the battery pack, so use only where good ventilation is available. Do not allow it to discharge in a container, such as a bag.

●If you stop recharging or discharging part way through, make sure to remove the battery pack before unplugging the adapter’s AC cord.

●Remove the battery pack from the adapter immediately after discharging.

●To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●Make sure you unplug the DC cord before charging or discharging the battery pack.

●The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHARGE indicator should blink during recharging. If it doesn’t, contact your nearest JVC dealer.

GETTING STARTED

To DC IN jack

To AC outlet

 

DC OUT

 

terminal

AC Power

DC Cord Adapter/Charger

AA-V15U

To car’s cigarette lighter

Car Battery Cord socket AP-V7U (optional)

Car Battery

Charger/Adapter

BH-V3U (optional)

USING AC POWER

Use the AC Power Adapter/Charger (connect as shown in the illustration to the left).

NOTES:

●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.

●When using the DC cord, make sure you connect the end of the cord with the core filter to the camcorder. The core filter reduces interference.

USING A CAR BATTERY

Use the optional Car Battery Cord or Car Battery Charger/Adapter (connect as shown in the illustration to the left).

NOTES:

●When using the car battery, leave the engine idling.

●The optional Car Battery Charger (BH-V3U) can also be used to charge the battery pack (except BN-V20U/V856U).

●When using the optional Car Battery Charger or Car Battery Cord (AP-V7U), refer to the respective instruction booklet.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents For Customer Use GR-AX940Dear Customer It is recommended that youFor clock operation Power Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsTo remove the battery pack Using the battery packSlide Battery Release and pull out the battery pack For more detailsZoom Lithium Battery CR2025 x 1DC Cord for clock operationZoom out Cassette AdapterContents Supply Power PowerAttach Battery Pack Detach Battery PackDischarged Charge MarkerSwitch OFF Power Clock Lithium Battery Insertion/RemovalRemove Battery Holder Insert Battery in HolderDate/Time Settings Tape Length Setting Recording Mode SettingSET Recording Mode ContOpen Cassette Holder Loading/Unloading a CassetteINSERT/REMOVE Cassette Close Cassette HolderViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Adjust LengthTripod Mounting Attach StrapBasic Recording Power Switch PositionLoad a Cassette Start ShootingViewfinder Indications Stop RecordingPress Display Button Push the Power Zoom Lever towards T EN Recording Basic FeaturesTo check the end of the last recording Feature Quick ReviewBasic Features Feature Picture StabilizerPress P. STABILIZER. appears To brighten the scene when natural lighting is too dim Feature Video LightWhen not using the video light, turn it off to save Battery powerSnapshot Recording Advanced FeaturesTake Snapshot If you press during Record-StandbyFade/Wipe Modeengage FADE- or WIPE-STANDBYStart or END Recording Select Mode Advanced FeaturesProgram AE With Special Effects Press P.AE to cycle through the modes as shown on the leftSports SepiaND Effect Nega/Posi Negative/PositivePress the Select Dial to display the Menu Screen Date/Time InsertSelect the Desired Mode Access Title MenuInstant Titles RETURN. Then press the Select Dial to close Menu ScreenUsing Menu For Detailed Adjustment Make SettingEND Setting Menu Screen Available Using The Menu Button Menu Screen Available Using The Select DialDemo Mode is set to on and the Menu Screen is closed Tally lamp comes on to signal the start of recordingAllows you to set the current date and time pg Recording pgAccess Manual Exposure Access Exposure MenuAdjust Exposure END Adjustment of ExposurePatterns that are regularly repeated FocusingAccess Manual Focus Access Focus MenuAdjust Focus END Adjustment of FocusAccess White Balance Adjustment White Balance AdjustmentSET Function Parameters To Return To Automatic White BalanceManual White Balance Operation Enter SettingSET Manual White Balance To Change The Tint For RecordingAccess INT. Time Menu Self-TimerStart Delayed Recording To Cancel Self-TimerTime-Lapse AnimationRewind or Fast-Forward the tape Playback Basic PlaybackPlay Back Stop PlaybackActivate Manual Tracking TrackingFeature Still Playback Playback FeaturesFeature Shuttle Search Feature Counter Memory FunctionUsing The Cassette Adapter EN41 Insert BatteryCassette Adapter VHS Playpak Basic Connections And Tape Dubbing When connecting the cables, open this coverBasic Connections Connection For Tape DubbingTape Dubbing Clean Lens Cleaning The CamcorderAfter Use Remove EyepieceRecording does not start No power is suppliedAnimation or Time-Lapse is not AvailableAn error number i.e. E03 appears Review or Retake modeDuring recording, the indications do not appear Tape will not ejectClock Battery Warning White Balance Mode IndicatorTape Remaining Time Displayed and the tape remaining time warning48EN Power Switch Battery Release Switch Video Light SwitchDC in Jack Connectors w to r are located beneath the cover Tally Lamp Power LampPg , 9 Index TermsTo prevent damage and prolong service life When using the AC Power Adapter/Charger in areasOther than the USA To avoid hazardAvoid using the unit For safety, do notDuring use Store cassettesConnectors Provided Accessories Optional AccessoriesGeneral Alimentacion AlimentaciónColocacion DE LA Bateria Indicador de cargaDeslice Battery Release y extraiga la batería Utilización de la bateríaPara extraer la batería EN for Servicing Only in U.S.A Warranty Only in U.S.A. EN57 Memo Memo GR-AX940
Top Page Image Contents