JVC GR-AX940 manual Animation, Time-Lapse

Page 37

Animation

You can give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time.

NOTE:

Before performing the following steps, make sure that:

●The Power Switch is set to “PRO.”.

●The camcorder is in the Record-Standby mode.

●The recording mode is set to “SP”.

1 ACCESS MENU SCREEN

Press MENU.

2 SET RECORDING TIME

Rotate the Select Dial to move the highlight bar to “NEXT” in Menu Screen 1 and press it to display Menu Screen 2. Then, move the highlight bar to “REC TIME” and press it. The REC TIME Menu appears. Rotate the Select Dial to move the highlight bar to the desired time, then press it. The Menu Screen reappears with the highlight bar on “RETURN”. Press the Select Dial again to close the Menu Screen.

3 START RECORDING

Press the Recording Start/Stop Button after focusing on the subject. The recording stops automatically after the selected period of time.

4 ASSEMBLE SERIES OF PICTURES Repeat step 3 for the desired number of pictures.

5 RELEASE ANIMATION MODE

Set “REC TIME” in the Menu screen to “OFF”.

NOTES:

●For best results, make sure the camcorder is secured when shooting in Animation or Time- Lapse mode.

●Fade- or wipe-in/out cannot be performed during Animation or Time-Lapse shooting.

●Before performing other operations following Animation or Time-Lapse recording, make sure the Animation or Time-Lapse mode is deactivated.

●Self-Timer, Animation and Time-Lapse are canceled when the power is shut off or when the cassette is ejected.

EN37

Time-Lapse

You can record sequentially at preset time spans. Leaving the camcorder aimed at a specific subject, you can record subtle changes over an extended period of time.

NOTE:

Before performing the following steps, make sure that:

●The Power Switch is set to “PRO.”.

●The camcorder is in the Record-Standby mode.

●The recording mode is set to “SP”.

 

ACCESS MENU SCREEN

 

1 Press MENU.

 

 

 

 

 

 

 

SET INTERVAL BETWEEN

 

 

RECORDING

 

highlight bar to “INT. TIME” and press it. The

2 RECORDINGS

 

 

 

 

Rotate the Select Dial to move the highlight bar

 

 

to “NEXT” in Menu Screen 1 and press it to

 

 

display Menu Screen 2. Then, move the

 

 

INT. TIME Menu appears. Rotate the Select Dial

 

 

to move the highlight bar to the desired time,

 

 

then press it. The Menu Screen reappears.

 

 

 

 

 

 

 

 

 

 

 

SET RECORDING TIME

 

 

 

3 Rotate the Select Dial to move the highlight bar

 

 

to “REC TIME”, then press it. The REC TIME

 

 

Menu appears. Rotate the Select Dial to move

 

 

the highlight bar to the desired time, then press

 

 

it. The Menu Screen reappears with the

 

 

highlight bar on “RETURN”. Press the Select

 

 

Dial again to close the Menu Screen.

 

 

 

 

 

 

 

 

 

 

START TIME-LAPSE RECORDING

 

4 Press the Recording Start/Stop Button. Recording

 

 

and intervals alternate automatically.

 

 

 

 

 

 

 

 

 

 

RELEASE TIME-LAPSE MODE

 

5 To release when “

 

 

 

 

” is displayed, set

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“REC TIME” and “INT. TIME” in the Menu Screen to “OFF”. To release when

“ ” and “” are not displayed, press the Recording Start/Stop Button to display

“ ”, then set “REC TIME” and “INT. TIME” in the Menu Screen to “OFF”.

Page 36 Page 38
Image 37
Page 36 Page 38
Contents For Customer Use GR-AX940It is recommended that you Dear CustomerFor clock operation Power Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsTo remove the battery pack Using the battery packSlide Battery Release and pull out the battery pack For more detailsZoom Lithium Battery CR2025 x 1DC Cord for clock operationZoom out Cassette AdapterContents Supply Power PowerAttach Battery Pack Detach Battery PackDischarged Charge MarkerSwitch OFF Power Clock Lithium Battery Insertion/RemovalRemove Battery Holder Insert Battery in HolderDate/Time Settings Tape Length Setting Recording Mode SettingSET Recording Mode ContOpen Cassette Holder Loading/Unloading a CassetteINSERT/REMOVE Cassette Close Cassette HolderViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Adjust LengthTripod Mounting Attach StrapBasic Recording Power Switch PositionLoad a Cassette Start ShootingStop Recording Viewfinder IndicationsPress Display Button Push the Power Zoom Lever towards T EN Recording Basic FeaturesTo check the end of the last recording Feature Quick ReviewFeature Picture Stabilizer Basic FeaturesPress P. STABILIZER. appears To brighten the scene when natural lighting is too dim Feature Video LightWhen not using the video light, turn it off to save Battery powerSnapshot Recording Advanced FeaturesTake Snapshot If you press during Record-StandbyModeengage FADE- or WIPE-STANDBY Fade/WipeStart or END Recording Select Mode Advanced FeaturesProgram AE With Special Effects Press P.AE to cycle through the modes as shown on the leftSports SepiaND Effect Nega/Posi Negative/PositivePress the Select Dial to display the Menu Screen Date/Time InsertSelect the Desired Mode Access Title MenuInstant Titles RETURN. Then press the Select Dial to close Menu ScreenMake Setting Using Menu For Detailed AdjustmentEND Setting Menu Screen Available Using The Menu Button Menu Screen Available Using The Select DialDemo Mode is set to on and the Menu Screen is closed Tally lamp comes on to signal the start of recordingAllows you to set the current date and time pg Recording pgAccess Manual Exposure Access Exposure MenuAdjust Exposure END Adjustment of ExposurePatterns that are regularly repeated FocusingAccess Manual Focus Access Focus MenuAdjust Focus END Adjustment of Focus Access White Balance Adjustment White Balance Adjustment SET Function Parameters To Return To Automatic White BalanceManual White Balance Operation Enter SettingSET Manual White Balance To Change The Tint For RecordingAccess INT. Time Menu Self-TimerStart Delayed Recording To Cancel Self-TimerTime-Lapse AnimationRewind or Fast-Forward the tape Playback Basic PlaybackPlay Back Stop PlaybackActivate Manual Tracking TrackingFeature Still Playback Playback FeaturesFeature Shuttle Search Feature Counter Memory FunctionInsert Battery Using The Cassette Adapter EN41Cassette Adapter VHS Playpak Basic Connections And Tape Dubbing When connecting the cables, open this coverBasic Connections Connection For Tape DubbingTape Dubbing Clean Lens Cleaning The CamcorderAfter Use Remove EyepieceRecording does not start No power is suppliedAnimation or Time-Lapse is not AvailableAn error number i.e. E03 appears Review or Retake modeDuring recording, the indications do not appear Tape will not ejectClock Battery Warning White Balance Mode IndicatorTape Remaining Time Displayed and the tape remaining time warning48EN Power Switch Battery Release Switch Video Light SwitchDC in Jack Connectors w to r are located beneath the cover Tally Lamp Power LampPg , 9 Index TermsTo prevent damage and prolong service life When using the AC Power Adapter/Charger in areasOther than the USA To avoid hazardAvoid using the unit For safety, do notDuring use Store cassettesProvided Accessories Optional Accessories ConnectorsGeneral Alimentacion AlimentaciónColocacion DE LA Bateria Indicador de cargaUtilización de la batería Deslice Battery Release y extraiga la bateríaPara extraer la batería EN for Servicing Only in U.S.A Warranty Only in U.S.A. EN57 Memo Memo GR-AX940
Top Page Image Contents