JVC LYT0329-001B manual When blank portion is recorded on a tape, Proper recording, Shooting

Page 19

EN19

NOTE: Recording From The Middle Of A Tape

Time Code

During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback.

If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.

To perform Random Assemble Editing (☞ pg. 58 – 63), time code is necessary. If during recording a blank portion is recorded partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent leaving a blank portion on a tape, perform the procedure in “Recording From The Middle of A Tape” (see below) in the following cases;

•After playing back the recorded tape, when you shoot again.

•When power shuts off during shooting. •When a tape is removed and re-inserted during

shooting.

•When shooting using a partially recorded tape. •When shooting on a blank portion located

partway through the tape.

•When shooting again after already shooting a scene and opening/closing the cassette cover.

Display

TC 12 : 34 : 24

Time code is displayed during playback.

Minutes

Seconds

Frames

(25 frames = 1 second)

RECORDING

Recording From The Middle Of A Tape

1.Play back a tape to find the spot at which you want to start recording, then engage the Still Playback mode (☞ pg. 44).

2.Set the Power Switch to the camera position (“ ”, “ ”, “5S” or “ ”) and start recording.

NOTES:

●The Time Code cannot be reset.

●During fast-forwarding and rewinding, time code indication does not move smoothly.

When blank portion is recorded on a tape

Time code

 

 

Time code

Time code

00:00:00

 

 

05:43:21

00:00:00

 

 

 

 

 

 

 

Tape

 

Already recorded scene

 

Blank

 

Newly recorded scene

 

 

 

 

 

 

Shooting start point

Shooting stop point

Shooting start point

Proper recording

 

 

 

 

 

Time code

 

 

Time code

Time code

00:00:00

 

 

05:43:21

05:44:00

Tape

Already recorded scene

New scene

Latest scene

Shooting start point

Shooting start point

Shooting start point

Page 18 Page 20
Image 19
Page 18 Page 20
Contents GR-DVL9600 GR-DVL9500 It is recommended that you Dear CustomerCharger AA-V68EG Min DVM-30 AC Power AdapterRemote Control Cleaning ClothSignal Compression Luminance Signal Y Lens Colour Difference Signal R-Y/B-YAnalysis Mic Conversion Contents Charging the Battery Pack PowerTo Detach The Battery Pack Using the Battery PackUsing AC Power Attach Battery PackBattery Date/Time SettingsCont Close Cassette Cover Loading/Unloading a CassetteOpen Cassette Cover INSERT/REMOVE TapeSET Recording Mode Recording Mode SettingSet depending on your preference Viewfinder Adjustment Grip AdjustmentAttach Strap Adjust LengthShoulder Strap Attachment Tripod MountingOperation Mode Load a Cassette Recording Basic RecordingStart Shooting Press IND. ON/OFF Button Stop RecordingBefore the following steps, perform pg Shooting While Watching The LCD MonitorInterface Shooting Journalistic ShootingBrightness Control Zoom Basic RecordingZoom Out Shooting When blank portion is recorded on a tapeAfter playing back the recorded tape, when you shoot again Proper recordingSET Function Parameters EN Recording Advanced FeaturesDisplaying The Date And Time During Recording Select FunctionScene 5-second recording Engage 5S ModeEND 5S Mode Dissolves during 5 second recording modeTo End Progressive Video Recording Recording Advanced FeaturesProgressive Mode Recording Start Progressive Mode RecordingScan C Description of Progressive Scan CCDRegular shooting of moving images Frame Scan a Scan BPRO Snapshot Recording Advanced FeaturesPRO Snapshot Mode Selection Pro SnapshotProgressive Mode Motor Drive ModeTo Remove The Shutter Sound Take Snapshot If the Power Switch is set toSnapshot Flash Auto Flash Engage RECORD-STANDBYAdjust Brightness of Flash Flash Brightness AdjustmentAccess Manual Mode Item Menu Access Flash AdjustmentUsing Menu For Detailed Adjustment Recording Menu Explanations Factory-presetSystem Menu Explanations Date/Time Menu ExplanationsEffect Selection Fade/Wipe EffectsFADE/WIPE Selection If you select Picture Wipe/Dissolve during recording Store Scene in Memory Engage the Record-Standby modePicture Wipe or Dissolve Selection Before the following steps, perform steps 1 through 4 on pgMenu Fader And Wipe MenuProgramme AE With Special Effects Select ModeDisable Mode Manual Mode Item Menu AE/EFFECT MenuStrobe ShutterClassic Film TwilightFocus detection zone FocusingAuto Focus Patterns that are regularly repeatedManual Focus Access Manual FocusAdjust Focus END Adjustment of FocusTo darken the image Access Exposure ControlWhen the background is overly dark or the subject light Exposure ControlTo Return To Automatic Iris Control Iris LockCentre SUBJECT, Lock Iris IrisSelect Auto in . Or set the Power Switch to White Balance AdjustmentAccessment White Balance Adjust When using a video light or other similar type of lightingSET Manual White Balance Enter SettingAdjustment Manual White Balance OperationEngage High Speed Recording Standby High Speed RecordingEND Recording Play Back Adjust VolumePlayback Basic Playback Rewind or Fast-forward the tapeBasic Playback Find Scene of Interest Progressive Slow-Motion PlaybackEND Playback Close Menu Playback MenuPlayback Menu allows you to set the following functions Displaying The Time Code During Playback Playback SoundRecording sound Display Output sound Use the provided Audio/Video A/V cable and S-Video cable When connecting the cables, open this coverBasic Connections Use the provided Audio/Video A/V cableConnectvcr Camcorder to TV or Connectinput VCR Output to TV Supply PowerPack. pg Connect Camcorder to PC Turn on PowerConnect Printer to PC if Necessary Connection To a Video Unit Equipped With a DV ConnectorTape Dubbing Press Play 4 to play back the source tape Digital DubbingMake Connections Start PlaybackRE-INSERT Holder Installing The BatteryPull OUT Battery Holder Insert Battery in HolderFunctions Buttons Switch set to the camera positionInfrared beam transmitting window Normal playback Stop 5 ButtonUp Button Forward Button RM-V711USelect Menu Remote sensor Play 4 ButtonEffect Operate VCR Random Assemble Editing R.A.EditSET REMOTE/VCR Code SET Remote to Operate VCRSelect Scenes Make ConnectionsUSE FADE/WIPE on Scene Transition if Necessary Select ScenesSET EDIT-IN Point SET EDIT-OUT PointPrepare Source Tape Automatic Editing to VCRStop Editing Choose a Scene For More Accurate EditingDiagnosing VCR’S Against Camcorder Timing Prepare for R.A. EditInput Correction Data Adjustment of VCR’S Against Camcorder TimingAccess Playback Menu Power Switch Playback MenuStop Dubbing Audio DubbingBegin Dubbing Pause During DubbingPrepare for Insert Editing Insert EditingFind Edit OUT Point Find Edit in PointCorrective Action TroubleshootingEN67 Troubleshooting EN69 Corrective Action EN TroubleshootingAfter Use Cleaning The Camcorder72EN Control VOL # Date/Time Reset Button ResetTally Lamp Power Lamp Stop Button 5, StopIndications LCD Monitor/Viewfinder Indications During Recording444 Indications Function LCD Monitor/Viewfinder Indications During PlaybackPg , 48 Monotone Motor Drive ModeSound Mode Pg , 7To avoid hazard To prolong service lifeFor safety, do not Avoid using the unitSerious malfunctioning Do not leave the unitTo protect the unit, do not About moisture condensationGeneral AC Power Adapter/Charger AA-V68EGConnectors CamcorderGR-DVL9500

LYT0329-001B specifications

The JVC LYT0329-001B is a high-performance lens designed specifically for professional imaging applications, showcasing JVC’s commitment to advanced optical technology. Tailored primarily for use with select JVC camcorders, this lens exemplifies superior image quality and versatility, making it a prime choice for filmmakers and videographers alike.

One of the most prominent features of the LYT0329-001B is its exceptional optical design, which includes high-precision glass elements that minimize distortion and aberrations. The lens incorporates advanced coatings that improve light transmission, ensuring vibrant colors and contrast in various lighting conditions. This attention to detail results in stunningly clear images, a critical requirement for professional-level video production.

The lens boasts a focal length of 29mm, providing a versatile field of view suitable for a range of shooting scenarios, from wide-angle shots to closer subjects. This adaptability is particularly beneficial when shooting in tight spaces or capturing expansive landscapes. Furthermore, the integrated zoom functionality allows for seamless transitions between different framing options, greatly enhancing creative control during filming.

Another key technology in the LYT0329-001B is its superb autofocus system, which utilizes cutting-edge algorithms to ensure rapid and accurate focusing. This feature is indispensable in dynamic shooting environments where subjects may move unpredictably. By maintaining sharp focus, the lens enables filmmakers to deliver professional content without the need for extensive manual adjustments.

Durability and reliability are also standout characteristics of the LYT0329-001B. Built with robust materials, this lens is designed to withstand the rigors of professional use, including varying temperatures and environmental conditions. Its compact size contributes to ease of use, allowing for smooth mounting and dismounting on compatible camcorders without compromising the overall rig’s balance.

In summary, the JVC LYT0329-001B is a testament to JVC’s expertise in optical engineering, offering filmmakers a powerful tool for high-quality video production. With its advanced optical features, versatile focal length, and reliable autofocus system, this lens stands out as an essential component for any serious videographer looking to elevate their work.
Top Page Image Contents