JVC LYT0329-001B manual Journalistic Shooting, Interface Shooting, Brightness Control

Self-Recording

Select Dial

BRIGHT – – – – –6– – – – –

EN17

Journalistic Shooting

In some situations different angles of shooting may be required for more dramatic results.

1	OPEN LCD MONITOR
	Make sure the LCD monitor is fully open.
2
	TILT LCD MONITOR
	Tilt the LCD monitor in the most convenient
	direction.
	•The LCD monitor can rotate almost full circle (270°:
	90° downward, 180° upward).
Interface Shooting
A person you shoot can view himself/herself in the LCD
monitor, and you can even shoot yourself while viewing
your own image in the LCD monitor.
1	TILT LCD MONITOR UPWARD	RECORDING
	viewfinder is pulled out at that time, it will also
	Open the LCD monitor and tilt it upward to 180
	degrees so that it faces forward.
	•The monitor image is inverted vertically. If the
	switch on.
2
	START RECORDING
	Point the lens toward the subject (yourself when self-
	recording) and start recording.
	•During Interface Shooting, the “Tape Running”
	indicator and warning indications (☞ pg. 75) are
	the only ones that are shown; they appear reversed
	in the display as they would when viewing a mirror,
	but are not reversed in the recording.

NOTE:

The tape remaining indicator does not appear during interface shooting. However, when the remaining time reaches 2 minutes, the indicator appears showing the

remaining time: (blinking) (blinking) (blinking)

Brightness Control

You can adjust the brightness of the display by rotating the Select Dial.

1 ADJUST BRIGHTNESS

Rotate the Select Dial until the brightness indicator moves and the display reaches its appropriate brightness.

•The brightness indication appears on the display. •If the viewfinder is pulled out, it is also possible to

adjust its brightness.