JVC LYT0329-001B Insert Editing, Find Edit OUT Point, Find Edit in Point, Pause During Editing

Display

6w

TC 12 : 34 : 15

PLA

Y

O

F

F

5S

Lock Button

Power Switch

EN65

Insert Editing

You can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in- and out-points. The original audio remains unchanged.

NOTES:

●Insert Editing is not possible on a tape recorded in the LP mode or on a blank portion of a tape.

●To perform Insert Editing while watching in the television, make connections (☞ pg. 48).

1 FIND EDIT OUT POINT

Playback the tape to locate the point where you want to stop editing. Confirm the time code at this point (☞ pg. 47).

2 FIND EDIT IN POINT

Press REW (2) until the point is located, then press PAUSE (6).

Remote sensor

T W START/STOP

DISPLAY INSERT

REW(IND)

PAUSE

3 PREPARE FOR INSERT EDITING

Press and hold INSERT (w) on the remote control, then press PAUSE (6). “6w” and the Time Code (min.:sec.) appear and the camcorder enters Insert- Pause mode.

4 START RECORDING

Press START/STOP to begin editing.

•Confirm the insert at the time code you checked in step 1.

5 PAUSE DURING EDITING

Press START/STOP. The camcorder re-enters Insert Pause mode. Press again to resume editing.

6 STOP EDITING

Press STOP (5) while the camcorder is in the Insert- Pause mode.

NOTES:

● Programme AE with special effects (☞ pg. 34) can be

used to spice up the scenes being edited during Insert

Editing.

● To display the Time Code during Insert Editing,

STOP

PLAY

☞ pg. 46.

● When performing Insert Editing, the tape’s Video Area

RM-V711U (provided)

and Sub-Code Area (☞ pg. 4) are rewritten, so the date

and time information changes.

● If you perform Insert Editing onto a blank space on the

tape, the audio and video may be disrupted. Make sure

you only edit recorded areas.

● During Insert Editing, when the tape moves to scenes

recorded in the LP mode or a blank portion, Insert Edting

stops and “ERROR! REFER MANUAL” appears.