JVC LYT0329-001B manual EN Troubleshooting, Corrective Action

70ENTROUBLESHOOTING(cont.)

SYMPTOM

37.Play, Rewind and Fast-Forward functions do not work.

38.The tape is moving, but there is no picture.

39.The LCD monitor indications are distorted.

40.Images on the LCD monitor are jittery.

41.The LCD monitor, the viewfinder and the lens have become dirty

(ex. fingerprints).

42.An unusual mark appears.

43.An error indication (E01 — E06) appears.

44.The charger indicator on the AC Power Adapter/Charger does not light.

45.The recording mode indicator “LP” blinks.

46.Picture does not appear on the LCD monitor.

47.When the image is printed from the printer, a black bar appears at the bottom of the screen.

48.The power lamp blinks.

	POSSIBLE CAUSES		CORRECTIVE ACTION
37. • The Power Switch is not set to		37.	• Set the Power Switch to “	”
“	”.		(☞ pg. 43).
38. • Your TV has AV input terminals,		38.	• Set the TV to the mode or
but is not set to its VIDEO mode.			channel appropriate for video
• The cassette’s cover is open.			playback (☞ pg. 48, 49).
			• Close the cassette's cover
			(☞ pg. 9).
39. • During playback of the		39.
unrecorded portion, High-speed
Search and still playback, LCD			————
monitor indications appear
distorted. This is not a defect.
40. • The speaker volume is too great.		40.	• Turn the speaker volume down
			(☞ pg. 43).
41.		41.	• Wipe them gently with soft
	————		cloth. Wiping strongly can
			cause damage.
42.		42.	• Check the section of the manual
	————		that explains LCD monitor/
			viewfinder indications
			(☞ pg. 74, 75).
43. • A malfunction of some kind has		43.	• Remove the power supply
occurred. In this case the			(battery pack, etc.) and wait a
camcorder’s functions become			few minutes for the indication to
unusable.			clear. When it does, you can
			resume using the camcorder.
			If the indication remains even
			though you repeat the above
			two or three times, please
			consult your nearest JVC dealer.
44. • The temperature of the battery is		44.	• To protect the battery, it is
extremely high/low.			recommended to charge it in
• Charging is difficult in places			places with a temperature of
subject to extremely high/low			10°C to 35°C (☞ pg. 77).
temperatures.
45. • This occurs when recording in		45.
the LP mode is not available.
After the indicator blinks, the			————
recording mode switches to
“SP” and recording goes on.
46. • The viewfinder is pulled out.		46.	• Push the viewfinder back in.
• The LCD monitor's brightness			• Adjust the brightness of the LCD
setting is too dark.			monitor (☞ pg. 17).
			• If the monitor is tilted upward
			180 degrees, open the monitor
			fully (☞ pg. 23).
47. • This is not a malfunction.		47.	• By recording with “DIS”
			activated (☞ pg. 29) this can be
			avoided.
48. • The camcorder was turned on		48.	• Replace with a charged battery
when the battery power was			pack (☞ pg. 6, 7).
almost gone.