JVC GR-AXM230, GR-AX760, GR-SXM330, GR-SX960 Recording Mode Setting, Tape Length Setting

Perform steps 1 through 3 above.

12ENGETTINGSTARTED(cont.)

MENU Wheel			Recording Mode Setting
			Set the tape recording mode depending on your preference.
			Set the Power Switch to “ ”. The power lamp
			1 comes on.
			Press the MENU Wheel in. The Menu Screen
			2 appears.
			Rotate the MENU Wheel to select “ TO SYSTEM
Power Switch			3 MENU” and press it to display SYSTEM MENU.
			Rotate the MENU Wheel to select “REC MODE” and
Display			4 press it. The REC MODE Menu appears. Select “SP”
			or “EP” by rotating the MENU Wheel and press it.
REC MODE	REC MODE Menu		The Menu Screen reappears with the highlight bar on
			“ RETURN”. Press the MENU Wheel in to close the
SP
			Menu Screen.
EP
			•“EP” (Extended Play) is more economical, providing
			three times the recording time.
			NOTE:
EX I T			If the recording mode is switched during recording, the
			playback picture will be blurred at the switching point.
SP		Recording mode
		indicator

	Display
	TAPE L ENGTH		TAPE LENGTH
T 2 0			Menu
T 3 0
T 3 5
T 4 0
EX I T
		T 3 0		Tape length
				indicator

Tape Length Setting

Set the tape length according to the length of the tape used.

1

2 Rotate the MENU Wheel to select “TAPE LENGTH”, then press it. The TAPE LENGTH Menu appears.

3 Rotate the MENU Wheel to select the correct tape length setting.

•T20=20 minutes •T30=30 minutes •T35=35 minutes •T40=40 minutes (in SP)

4 Press the MENU Wheel in. The Menu Screen reappears with the highlight bar on “RETURN”. Press the MENU Wheel in to close the Menu Screen.

NOTE:

The tape remaining time (☞ pg. 14) is correct only if the correct tape length has been selected.