JVC GR-SXM330, GR-AXM230, GR-AX760, GR-SX960 34 EN, Cassette Adapter VHS Playpak, Cover, Ment door

Page 34

34EN

PLAYBACKUsingTheCassetteAdapter

Cassette Adapter (VHS Playpak)

Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a VHS VCR. It is fully compatible with any S-VHS/VHS video cassette recorder. The cassette adapter is battery powered and automatically performs tape loading and unloading.

1 Slide the battery cover up to remove it, install one “AA (R6)” size battery as shown, then reattach the

 

 

cover.

 

 

 

VCR

 

Slide the latch to open the adapter compartment

2 door, then insert the cassette and close the compart-

 

 

 

ment door.

Compartment door

Sliding latch

Compact video cassette

Reels

Recording safety hole

3 Load the cassette adapter into the VCR and play the tape back as you would any other.

4 Slide the latch and the compartment door opens automatically. This may take around 10 seconds. Do not attempt to force the adapter open. Then, insert your finger in the hole on the underside of the adapter as shown in the illustration at left, and push up and remove the cassette.

NOTES:

During tape loading and unloading, do not touch the reels for safety and tape protection.

Tapes recorded in S-VHS or S-VHS ET mode cannot be played back on a regular VHS VCR. Playback is possible with a VCR equipped with the S-VHS or SQPB (S-VHS QUASI PLAYBACK) function (GR-SXM330/SX960 only).

During special-effect playback (slow motion, still frame, etc.), the picture may vibrate or noise bars may appear on the screen.

To record on a VCR using a compact cassette and the adapter, cover the adapter’s recording safety hole with adhesive tape.

Image 34
Contents GR-SXM330 GR-SX960 GR-AXM230 GR-AX760 Dear Customer It is recommended that youImportant Safety Instructions EN3AC Adapter Battery PackShoulder Strap Lens Cap How To Attach The Lens Cap EN5To Detach The Battery Pack Slide Battery Release and pull out the battery packApproximate recording time unit min Perform of Charging the Battery Pack pgEN7 Use the AC Adapter connect as shown in the illustrationGetting Started Grip AdjustmentTripod Mounting EN9 Date/Time SettingsPress the Menu Wheel in to close the Menu Screen Recording Format Setting 10 ENRegular VHS VCR EN11VHS VCR with Sqpb Function Sqpb S-VHS Quasi Playback functionRecording Mode Setting Tape Length SettingLoading/Unloading a Cassette EN13To Stop Recording 14 ENShooting While Watching Rotate the Bright Wheel until the brightEN15 Journalistic Shooting models equipped with LCD monitor onlyZoom 16 ENZoom Out 5Sec. Rec 5-Sec. Recording GR-SX960/AXM230/AX760 only EN17Set Light OFF/AUTO/ON as required OFF Turns off the light If you press during Record-Standby Snapshot GR-SXM330 onlyPress Snapshot If you press during RecordingEN19 Fade/Wipe EffectsFades in/out to a black screen Program AE With Special Effects Captures faster action than Sports mode20 EN Indication appearDigital Effects EN21Using Menus For Detailed Adjustment Press the Menu Wheel in. The normal screen reappearsAdjustment Refer to Focusing pgSubject becomes slightly dark. This setting is suitable for Allows you to superimpose one of eight preset titles pg24 EN Date/Time Insert EN25 1 Set the Power Switch toInstant Titles Time-Lapse 26 ENAnimation RETURN. Press the Menu Wheel in again toExposure Control EN2728 EN FocusingPatterns that are regularly repeated EN29 White Balance AdjustmentManual White Balance Operation Press the Menu Wheel in again to close the Menu ScreenLoad a tape pg Set the Power Switch to 30 EN Playback Features EN31 To cancel the effect, select OFF in stepUse optional S-Video and Audio cables EN PlaybackUse optional Video and Audio cables Tape Dubbing Power supply instead of the battery pack pgBasic Connections EN33Cover 34 ENCassette Adapter VHS Playpak Slide the latch to open the adapter compartmentEN35 Using the Remote Control Unit GR-SXM330 onlyFunctions Buttons Installing The Batteries 36 ENAnimation And Time-Lapse Playback ZoomEN37 38 EN Insert EditingEN39 Audio DubbingFor Insert Editing and Audio Dubbing Recording does not start No power is suppliedRecording cannot be performed Animation or Time-Lapse is notPower source Indicators and the picture colorAn error number i.e. E03 appears That Date/Time setting is carried out42 EN Index Terms EN4344EN 3 4 5 t y # $ %EN45 Index 46 ENIndications During Recording Indications During Playback EN4748 EN USAEN49 Vertically, in their original casesAfter Use Cleaning The CamcorderRemove dust using a blower brush Turn the eyepiece counterclockwise and pull it outSpecifications Efectúe el paso 1 de Carga DE LA Bateria 52 ENAlimentación Tiempo de grabación aproximado unidad minGuia Para Operacion Rapida EN53EN for Servicing Only in U.S.A Warranty Only in U.S.A. EN55 1000MKV*UN*YP