JVC GR-SXM330, GR-AXM230, GR-AX760, GR-SX960 30 EN, Load a tape pg Set the Power Switch to

Page 30

30EN

PLAYBACKBasicPlayback

Stop (5) Button

Rewind (2) Button

Play/Pause (4/6) Button

Fast-Forward (3) Button

BRIGHT* Wheel

Power Zoom

Lever (VOL.*)

Speaker*

Set to “ ”.

*Models equipped with LCD monitor only.

1 Load a tape (☞ pg. 13).

Set the Power Switch to “

”.

2 To start playback, press 4/6.

 

•To stop playback, press 5.

 

•Press 2to rewind, or 3to fast-forward the tape during Stop mode.

NOTES:

●The camcorder shuts off automatically after about

5 minutes in Stop mode. To turn on again, set the Power

Switch to “OFF”, then to “ ”.

●When the Power Switch is set to “ ” and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power (models equipped with LCD monitor only).

●The playback picture can be viewed in the viewfinder

(with the LCD monitor* shut), on the LCD monitor* or on a connected TV (☞ pg. 32, 33).

*Models equipped with LCD monitor only.

●You can also view the playback picture on the LCD monitor with it flipped over and retracted (models equipped with LCD monitor only).

●If a blank portion on the tape is played back, the screen may become black. This is not a malfunction.

LCD Monitor Brightness Adjustment (models equipped with LCD monitor only): Rotate the BRIGHT Wheel towards “+” to brighten, or towards “–” to darken.

●The Bright Level Indicator is displayed under the Date/Time Display when you play back images recorded in Wide Mode (☞ pg. 23).

Speaker Volume Control (models equipped with LCD monitor only): Slide the Power Zoom Lever (VOL.) towards “+” to turn up the volume, or towards “–” to turn down the volume.

●The Speaker Volume Indicator is displayed under the Date/Time Display when you play back images recorded in Wide Mode (☞ pg. 23).

Still Playback: Pauses during playback.

1)Press 4/6during playback.

2)To resume normal playback, press 4/6again.

●Noise bars will appear and the picture will become monochrome during Still Playback.

●If TBC (☞ pg. 31) is engaged, noise bars will not appear. This mode is called Fine Still (GR-SXM330 only).

Shuttle Search: Allows high-speed search in either direction.

1)Press 3 for forward or 2 for reverse search during playback.

2)To resume normal playback, press 4/6.

●During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●Noise bars appear and pictures may become monochrome or darken during Shuttle Search. This is normal.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents GR-SXM330 GR-SX960 GR-AXM230 GR-AX760 Dear Customer It is recommended that youImportant Safety Instructions EN3Battery Pack AC AdapterShoulder Strap Lens Cap How To Attach The Lens Cap EN5To Detach The Battery Pack Slide Battery Release and pull out the battery packApproximate recording time unit min Perform of Charging the Battery Pack pgEN7 Use the AC Adapter connect as shown in the illustrationGrip Adjustment Getting StartedTripod Mounting Date/Time Settings EN9Press the Menu Wheel in to close the Menu Screen Recording Format Setting 10 ENRegular VHS VCR EN11VHS VCR with Sqpb Function Sqpb S-VHS Quasi Playback functionRecording Mode Setting Tape Length SettingLoading/Unloading a Cassette EN13To Stop Recording 14 ENShooting While Watching Rotate the Bright Wheel until the brightEN15 Journalistic Shooting models equipped with LCD monitor only16 EN ZoomZoom Out EN17 5Sec. Rec 5-Sec. Recording GR-SX960/AXM230/AX760 onlySet Light OFF/AUTO/ON as required OFF Turns off the light If you press during Record-Standby Snapshot GR-SXM330 onlyPress Snapshot If you press during RecordingFade/Wipe Effects EN19Fades in/out to a black screen Program AE With Special Effects Captures faster action than Sports mode20 EN Indication appearDigital Effects EN21Using Menus For Detailed Adjustment Press the Menu Wheel in. The normal screen reappearsAdjustment Refer to Focusing pgSubject becomes slightly dark. This setting is suitable for Allows you to superimpose one of eight preset titles pg24 EN EN25 1 Set the Power Switch to Date/Time InsertInstant Titles Time-Lapse 26 ENAnimation RETURN. Press the Menu Wheel in again toExposure Control EN27Focusing 28 ENPatterns that are regularly repeated EN29 White Balance AdjustmentManual White Balance Operation Press the Menu Wheel in again to close the Menu ScreenLoad a tape pg Set the Power Switch to 30 ENPlayback Features EN31 To cancel the effect, select OFF in stepEN Playback Use optional S-Video and Audio cablesUse optional Video and Audio cables Tape Dubbing Power supply instead of the battery pack pgBasic Connections EN33Cover 34 ENCassette Adapter VHS Playpak Slide the latch to open the adapter compartmentUsing the Remote Control Unit GR-SXM330 only EN35Functions Buttons Installing The Batteries 36 ENPlayback Zoom Animation And Time-LapseEN37 38 EN Insert EditingAudio Dubbing EN39For Insert Editing and Audio Dubbing Recording does not start No power is suppliedRecording cannot be performed Animation or Time-Lapse is notPower source Indicators and the picture colorAn error number i.e. E03 appears That Date/Time setting is carried out42 EN Index Terms EN4344EN 3 4 5 t y # $ %EN45 46 EN IndexIndications During Recording Indications During Playback EN4748 EN USAEN49 Vertically, in their original casesAfter Use Cleaning The CamcorderRemove dust using a blower brush Turn the eyepiece counterclockwise and pull it outSpecifications Efectúe el paso 1 de Carga DE LA Bateria 52 ENAlimentación Tiempo de grabación aproximado unidad minGuia Para Operacion Rapida EN53EN for Servicing Only in U.S.A Warranty Only in U.S.A. EN55 1000MKV*UN*YP
Top Page Image Contents