
""EN | FEATURES FOR RECORDING (cont.) |

Self-Timer
Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way, adding the final touch to a memorable picture.
1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.
2Open the LCD monitor fully, or pull out the viewfinder fully.
●You can tilt the LCD monitor upward to 180° so that it faces forward and view yourself while
3 | Set |
|
|
| ||
|
| MANUAL | ||||
| “ON ”. ( pg. 31, 36) |
|
|
|
| SEL F – T I MER – OF F |
|
|
|
| |||
|
| |||||
4 |
|
|
|
|
| ON |
To engage the |
|
|
|
for video recording, press
the Recording Start/Stop
Button.RETURN
NOTE:
If “BEEP” and “TALLY” are set to “OFF” ( pg. 37), the beep does not sound and the tally lamp does not light.
When the Recording Start/Stop Button or SNAPSHOT is pressed, the tally lamp changes as shown:
● After 15 seconds, the |
|
beep sounds and video |
|
recording starts. |
|
5 To stop |
|
recording, press the |
|
Recording Start/Stop | |
Button again. |
●The camcorder
OR
5Press SNAPSHOT.
●After 15 seconds, the beep sounds and snapshot recording starts. After that, the camcorder
6To end
Begins blinking
Blinks quickly (Self-Timer shooting starts soon)
Stops blinking and stays on
starts)
OR
Turns off
After approx. 15 sec.