JVC GR-D200 For More Accurate Editing, Diagnosing VCR/Camcorder Timing, Program, SELECT/SET twice

		EN￿$#
For More Accurate Editing	Adjustment Of VCR/Camcorder Timing
	4	Press R.A.EDIT ON/OFF to make the Random
Some VCRs make the transition from Record-Pause
to Record mode faster than others. Even if you begin		Assemble Editing menu disappear, then press
		MENU. The Menu Screen appears.
editing for the camcorder and the VCR at exactly the	5
same time, you may lose scenes you wanted, or find		Press + or – to select “t VIDEO“, and press
that you have recorded scenes you did not want. For	6	SELECT/SET. The VIDEO Menu appears.
a cleanly edited tape, confirm and adjust the timing		Press + or – to select “SYNCHRO”, and press
of the camcorder against your VCR.		SELECT/SET. The value for “SYNCHRO” is

Diagnosing VCR/Camcorder Timing

1Play back the tape in the camcorder, then point the remote control at the camcorder’s remote sensor and press R.A.EDIT ON/OFF.

Random Assemble Editing Menu appears.

Program 1

highlighted.

7 Based on the diagnostics performed, you can

now advance the VCR’s record timing by pressing

+. You can also delay the VCR’s record timing by

pressing –.

The adjustment range is from –1.3 to +1.3

seconds, in 0.1-second increments.

Press SELECT/SET to finish the setting.

I N	OUT MODE
1 – – – – : – –	~

2~

3~

4~

5~

6~

7~

8~

T I ME CODE	– – : – –
TOTAL	0 0 : 00

Random Assemble Editing Menu

8 Press + or – to select “BRETURN”, and press

SELECT/SET twice.

Now perform Random Assemble Editing

beginning with step 6 on page 63.

NOTES:

2Perform Random Assemble Editing on Program 1 only. In order to check VCR and camcorder timing, select the beginning of a scene transition as your Edit-In point.

3Play back the dubbed scene.

●If any images from the scene prior to the transition you chose for your Edit-In point were recorded, that means your VCR moves too quickly from Record-Pause to Record mode.

●If the scene you tried to dub starts in progress, the VCR is slow to start recording.

●Before performing actual Random Assemble Editing, do a few Random Assemble Editing trial runs to check whether the value you have input is appropriate or not, and make adjustments accordingly.

●Depending on the recorder, there may be situations where the timing difference cannot be fully corrected.

ADVANCED FEATURES