JVC GR-D372U Provided Accessories, How To Attach The Lens Cap, How To Attach The Core Filter

12 EN GETTING STARTED
Provided Accessories	How To Attach The Shoulder Strap
	Follow the illustration.
	1 Thread the strap through the eyelet.
OR	2 Fold it back and thread it through the strap
	guide and the buckle.
	● To adjust the length of the strap, loosen and then
	tighten the strap in the buckle.
	3 Slide the strap guide fully towards the eyelet.

1AC Adapter AP-V14U or AP-V18U

2 Battery Pack BN-VF707U

3 Audio/Video Cable (ø3.5 mini-plug to RCA plug) 4 USB Cable

5 Core Filter (for USB cable, see the right column for attachment)

6 CD-ROM

7 Shoulder Strap (see the right column for attachment)

8 Lens Cap (see the bottom for attachment)

NOTES:

●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

●Make sure to use the provided cables for connections. Do not use any other cables.

How To Attach The Lens Cap

To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.

NOTE:

To confirm the lens cap is on correctly make sure the cap is flush to the camcorder.

Place here during shooting.

Strap guide 2 Buckle

2

13

Eyelet

How To Attach The Core Filter

Attach the core filters to the cables. The core filter reduces interference.

1 Release the stoppers on both ends of the core filter.

Stopper

2 Run the cable through the core filter, leaving approx. 3 cm (1-3/16") of cable between the cable plug and the core filter.

Wind the cable once around the outside of the core filter as shown in the illustration.

Core filter

3 cm (1/3-1/16")

Wind once.

3 Close the core filter until it clicks shut.

NOTES:

●Take care not to damage the cable.

●When connecting a cable, attach the end with the core filter to the camcorder.