EDITING EN 41
| Connection To A Personal Computer | [A] Using USB cable | ||
| ||||
| It is possible to transfer still images stored on a | |||
|
|
|
| |
|
|
|
| |
[A] Using USB cable [B] Using DV cable | memory card to a PC. | |||
| ||||
OR
To USB | To DV | |
| IN/OUT | |
Core filter | Core filter | |
USB cable | DV cable | |
(provided) | ||
(optional) | ||
| ||
| Core filter | |
To USB | To DV connector | |
connector | ||
|
PC | PC with DV connector |
When connecting the camcorder to a PC using a DV cable, make sure to follow the procedure below. Connecting the cable incorrectly may cause malfunctions to the camcorder and/or the PC.
●Connect the DV cable first to the PC, and then to the camcorder.
●Connect the DV cable (plugs) correctly according to the shape of the DV connector.
[B] Using DV cable
It is also possible to transfer still/moving images to a PC with a DV connector by using the provided software, software equipped with the PC or commercially available software.
If you are using a Windows® XP, you can use Windows® Messenger to conduct video conferences over the Internet, using a camcorder. For details, refer to the help for the Windows® Messenger.
NOTES:
●Refer to “SOFTWARE INSTALLATION AND PC CONNECTION GUIDE” for the bundled software and drivers.
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 14)
●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.
●When using a DV cable, be sure to use the optional
●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.
●The date/time information cannot be captured into the PC.
●Refer to the instruction manuals of the PC and Software.
●The still images can also be transferred to a PC with a DV
●The system may not work properly depending on the PC or capture board you are using.
“USB” and/or “ 
” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while
“ 
” is displayed on the LCD
monitor since this can result in product damage.