JVC GR-D372U manual Normal Playback, Quick Review, Still Playback, To control the speaker volume

NOTES:

●The time code cannot be reset.

●During fast-forwarding and rewinding, the time code indication does not move smoothly.

●The time code is displayed only when “TIME CODE” is set to “ON”. (
pg. 32)

Quick Review

Enables to check the end of the last recording.

1)Press QUICK REVIEW during the Recording- Standby mode.

2)Tape is rewound for about several seconds and played back automatically, then pauses in the Recording-Standby mode for the next shot.

● Distortion may occur at start of playback. This is normal.

Recording From The Middle Of A Tape

1)Play back a tape or use Blank Search

(
pg. 22) to find the spot at which you want to start recording, then engage the Still Playback mode. (See the right column.)

2)Set the Power Switch to “REC” while pressing down the Lock Button located on the switch, then start recording.

	VIDEO PLAYBACK EN 21
Normal Playback
	¡
	VOL. +/–
6	Lock Button
1
Speaker
VIDEO/
MEMORY	MENU
7

1 Load a cassette. ( pg. 18)
2 Set the VIDEO/MEMORY Switch to “VIDEO”.
3 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the	PLAYBACK
switch.
4 To start playback, press 6.
5 To stop playback, press 7.
● During Stop mode, press 1 to rewind, or ¡ to
	&
fast-forward the tape.
	RECORDING
To control the speaker volume
Slide the Power Zoom Lever (VOL. +/–) towards
“+” to turn up the volume, or towards “–”to turn
down the volume.
	VIDEO
NOTES:
● The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
( pg. 23)
● If Stop mode continues for 5 minutes when power
is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power
Switch to “OFF”, then to “PLAY”.
● When a cable is connected to the AV connector,
the sound is not heard from the speaker.

Still Playback

Pauses during video playback.

1)Press 6 during playback.

2)To resume normal playback, press 6 again.

● If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.