JVC GR-D372U manual Initializing a Memory Card, To Reset The Number Of Prints

Page 28

28 EN

ADDITIONAL FEATURES FOR D.S.C.

 

 

 

 

 

 

 

To Print By Selecting Still Images And

 

Initializing A Memory Card

 

Number Of Prints

 

 

 

 

 

 

 

1 Perform steps 1 3 in “To Print All Still Images (One Print For Each)”. ( pg. 27)

2 Press 4 or 3 to select “CURRENT”, and press SET or 2. The DPOF screen appears.

3 Press 1 or 2 to select the desired file.

4 Press 4 or 3 to select the number indication (00), and press SET.

5 Select the number of prints by pressing 3 to increase the number, or 4 to decrease the number, and press SET.

Repeat steps 3 through 5 for the desired number of prints.

The number of prints can be set up to 15.

To correct the number of prints, select the image again and change the number.

6 Press 4 or 3 to select “RETURN”, and press SET. The “SAVE?” appears.

If you did not change any

settings in step 3 through 5, the DPOF Menu reappears.

7 Press 4 or 3 to select “EXECUTE” to save the setting you have just made, and press SET.

To cancel selection, select “CANCEL”.

You can initialize a memory card any time. After initializing, all files and data stored in the memory card, including those which have been protected, are cleared.

1 Set the VIDEO/MEMORY Switch to “MEMORY”.

2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

3 Press MENU. The Menu Screen appears.

4 Press 4, 3, 1 or 2 to select “FORMAT”, and

press SET. The FORMAT screen appears.

5 Press 4 or 3 to select “EXECUTE”, and press

SET. The memory card is initialized.

When initialization is finished, “NO IMAGES STORED” appears.

To cancel initialization, select “RETURN”.

CAUTION:

Do not perform any other operation (such as turning off the camcorder) during initialization. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialization. If the memory card becomes corrupted, initialize it.

To Reset The Number Of Prints

1 Perform steps 1 3 in “To Print All Still Images (One Print For Each)”. ( pg. 27)

2 Press 4 or 3 to select “RESET”, and press SET. The DPOF screen appears.

3 Press 4 or 3 to select “EXECUTE”, and press SET. The normal playback screen appears.

To cancel selection, select “RETURN”.

The number of prints is reset to 0 for all still images.

CAUTION:

While performing the above, never disconnect power, as this may cause the memory card to be corrupted.

Image 28
Contents Digital Still Camera D.S.C. Recording Dear CustomerFor Customer Use Model No Serial NoRead This First Safety Precautions Important Safety Instructions Before Using This Camcorder We recommend cleaning your video heads before useUse SP Standard mode for important video recordings It is recommended that you use JVC brand cassette tapesData Battery Wipe/Fader EffectsBacklight Compensation LED LightContents EN Index EN Getting StartedÇIndicators ConnectorsControls ÉOther PartsDuring D.S.C. Recording Only Pause11 13 AM 1555During Video Playback During D.S.C. PlaybackI T / M I DE CHow To Attach The Lens Cap Provided AccessoriesHow To Attach The Core Filter Power Charging The Battery PackAbout Batteries Data Battery SystemMaximum continuous recording time Auto/Manual Mode Operation ModePower-Linked Operation Language Settings Grip AdjustmentLanguage on the display can be changed.  pg Sure to fasten the velcro strip to your preferenceViewfinder Adjustment Brightness Adjustment Of The DisplaySet the Power Switch to REC while pressing Tripod MountingMake sure the camcorder’s power is off Open the card cover Getting StartedTo protect valuable recordings Close the card coverTape Remaining Time Basic RecordingLCD Monitor And Viewfinder EN Video Recording Time CodeZoom Zoom OutTo control the speaker volume Normal PlaybackQuick Review Still PlaybackEN Video Playback Shuttle SearchConnections To a TV Or VCR If using a VCR , go to stepVideo Playback EN Normal Playback Of Images EN D.S.C. RecordingBasic Shooting D.S.C. Snapshot C. PlaybackAuto Playback Of Images Index Playback Of Files Removing On-Screen DisplayResetting The File Name EN Additional Features for D.S.CProtecting Files To Remove ProtectionSetting Print Information Dpof Setting Deleting FilesTo delete the currently displayed file To delete all files stored in the memory cardInitializing a Memory Card To Reset The Number Of PrintsNumber Of Prints Video Playback Menu EN Menus for Detailed Adjustment Recording MenusEnglish / Français AutoEspañol / Português Sound Mode and Narration Playback MenusFine / Standard On Screen OFF / LCD / LCD/TVWide Mode LED LightLive Slow Night-AliveMotor Drive Mode To reset to Auto FocusManual Focus Tape Press SnapshotExposure Control Iris Lock Video MemoryWhite Balance Adjustment To REC Wipe Or Fader EffectsTo deactivate the selected effect EN Features for Recording EffectsProgram AE, Effects And Shutter SportsEditing EN EN Editing Digital DubbingTo use this camcorder as a recorder Using USB cable Using DV cableUsing USB cable B Using DV cable Memory card to a PCEN Troubleshooting PowerAdvanced features Video and D.S.C. RecordingOther problems WhitishAppears when the tape ends during recording or playback Displays the battery remaining powerRemaining power level High Exhausted Troubleshooting EN Cleaning The Camcorder EN User MaintenanceBattery Packs Using Household AC Plug AdapterAC Adapter CassettesEN Cautions Memory CardsLCD Monitor Main UnitHow To Handle a CD-ROM Declaration of ConformityAbout moisture condensation Serious malfunctioningEN Specifications CamcorderDpof Setting Motor Drive ModeRecording Capacity 42-45GR-D372U Software Installation and USB Connection Guide Contents JVC Software License Agreement Limited LiabilityTerm How to handle a CD-ROM System Requirements Software Installation Windows Connecting the USB cable To USB connectorDpof setting data Still imagesPlaying Back Files on the PC Windows Disconnecting the USB cable Windows Connections Macintosh USB cableFrom a memory card can cause problems When it is necessary to delete a file fromPlaying Back Files on the PC Macintosh Disconnecting the USB cable Macintosh Software Installation and USB Connection Guide