JVC GR-D47 manual Displays the battery remaining power, Remaining power level High Exhausted

Page 31

		TROUBLESHOOTING	EN 31
Warning Indications

		E01, E02 or E06
		UNIT IN SAFEGUARD MODE REMOVE AND

		REATTACH BATTERY

Displays the battery remaining power.

Remaining power level

High

Exhausted

As the battery power comes close to nil, the battery indicator blinks.

When the battery power is exhausted, power turns off automatically.

Appears when no tape is loaded. ( pg. 9)

CHECK TAPE’S ERASE PROTECTION TAB

Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to “A” or “M”. ( pg. 8)

USE CLEANING CASSETTE

Appears if dirt is detected on the heads during recording. Use an optional cleaning cassette. ( pg. 33)

CONDENSATION, OPERATION PAUSED

PLEASE WAIT

Appears if condensation occurs. (The two indications above swiches alternately every 3 seconds.) When this indication is displayed, wait more than 1 hour until condensation disappears.

The error indications (E01, E02 or E06) show what type of malfunction has occurred. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

E03 or E04

UNIT IN SAFEGUARD MODE EJECT AND REINSERT TAPE

The error indications (E03 or E04) show what type of malfunction has occurred. When an error indication appears, the camcorder turns off automatically. Eject the cassette once and re-insert it, then check if the indication clears. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

TAPE!

Appears if a tape is not loaded when the Recording Start/ Stop Button or SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M”.

TAPE END

REFERENCES

Appears when the tape ends during recording or playback. ( pg. 27)

SET DATE/TIME!

●Appears when the date/time is not set. ( pg. 8)

●Appears when the built-in clock (lithium) battery is discharged and the previously set date/time is erased. ( pg. 8)

LENS CAP

Appears for 5 seconds after power is turned on if the lens cap is attached.

COPYING FAILED

●Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.

Image 31

Contents Dear Customer To deactivate the demonstration, set Demo Mode to OFFLYT1458-001A EN Safety Precautions Before recording an important scene… EN Contents Getting Started Advanced Features Getting Started Provided AccessoriesHow To Attach The Shoulder Strap Getting Started ENEN Getting Started PowerHow To Attach The Core Filter for optional S-Video Cable Charging The Battery PackAbout Batteries Using The Battery PackGrip Adjustment Using AC PowerPower-Linked Operation Operation ModeDate/Time Settings Viewfinder AdjustmentTripod Mounting Brightness Adjustment Of The DisplayTo switch the recording mode, refer to pages 14 Loading/Unloading a CassetteTape Remaining Time Basic RecordingEN Video Recording LCD Monitor And ViewfinderTime Code Video Recording ENJournalistic Shooting Self RecordingBlank Search Normal PlaybackEN Video Playback Shuttle SearchWhite to Audio L Red to Audio R Yellow to Video To S-VIDEO If using a VCR, go to . If not, go to stepConnections To a TV Or VCR PlaybackEN Menus for Detailed Adjustment Changing The Menu SettingsMenus with Sub Menus Recording Menus Advanced FeaturesWhen the Menu Screen is closed after Demo Mode is turned on pg , Brightness Adjustment Of The DisplayOFF / on FeaturesSound Mode and Narration Playback MenusWhite LED Light Night ScopeTo deactivate Night-Scope To deactivate the selected effect Select OFF in . The effect indicator disappearsWipe Or Fader Effects Program AE With Special EffectsPress Snapshot EN Features for RecordingMotor Drive Mode Snapshot For Video RecordingAuto Focus Manual FocusTo return to automatic iris control Exposure ControlIris Lock To return to automatic exposure controlManual White Balance Adjustment White Balance AdjustmentBacklight Compensation EN Editing Dubbing To a VCRTo use this camcorder as a player To use this camcorder as a recorder Equipped With a DV Connector DigitalDubbing Dubbing To Or From a Video UnitConnection To a Personal Computer Video Recording pg Power pgVideo Playback pg Loading/Unloading a Cassette pgVideo Recording EN TroubleshootingPower Video PlaybackBe avoided Advanced features Other problemsPower Switch is set to a HSet the Power Switch to M. pg Subject is too bright HSet r to SPOTLIGHT. pgMonitor fully. pg Places subject to low temperature, images become darkTime Code is set to OFF HSet Time Code to ON. pg , 16 Remaining power level High Exhausted Displays the battery remaining powerLCD Monitor EN CautionsMain Unit After Use Cleaning The CamcorderEN User Maintenance Slide BATT.RELEASE 1 and remove the battery packAC Adapter CamcorderEN Index Other Parts ConnectorsIndicators ControlsBlank Search LCD Monitor/Viewfinder IndicationsIndex During Video RecordingDate/Time Wide Mode Wide ModeTerms ConnectionsVictor Company of Japan, Limited