VIDEO PLAYBACK EN 13
Connections To A TV Or VCR
These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.
To AV | To S |
Audio/Video | |
cable | (optional) |
(provided) |
|
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as shown in the illustration.
If using a VCR, go to step 3. If not, go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
To choose whether or not the following displays appear on the connected TV
●Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 14, 17)
●Time Code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 14, 17)
●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 14, 17)
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 7)
& PLAYBACK
1 
2 
3 
4
VCR
A White to AUDIO L IN*
B Red to AUDIO R IN*
C Yellow to VIDEO IN**
DTo S-VIDEO IN***
TV |
●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.
●When a cable is connected to the AV connector, the sound is not heard from the speaker.
VIDEO RECORDING
*Not required for watching still images only.
**Connect when your TV/VCR has only A/V input connectors.
***Connect when your TV/VCR has