NOTES:
●The time code cannot be reset.
●During
●The time code is displayed only when “TIME CODE” is set to “ON”. ( pg. 24)
Quick Review
Enables to check the end of the last recording.
1)Press QUICK REVIEW during the Recording- Standby mode.
2)Tape is rewound for about several seconds and played back automatically, then pauses in the
● Distortion may occur at start of playback. This is normal.
Recording From The Middle Of A Tape
1)Play back a tape or use Blank Search
( pg. 20) to find the spot at which you want to start recording, then engage the Still Playback mode. ( pg. 20)
2)Set the Power Switch to “REC” while pressing down the Lock Button located on the switch, then start recording.