MENUS FOR DETAILED ADJUSTMENT EN 25
DEMO MODE |
| SOUND MODE |
| ||||||
OFF: Automatic demonstration will not take | [STEREO |
|
|
|
| ]: Sound is output on both “L” and | |||
|
|
|
| ||||||
place. | “R” channels |
|
|
|
| in stereo. | |||
[ON]: Demonstrates certain functions such as | SOUND L |
|
| : Sound from the “L” channel is | |||||
|
| ||||||||
Program AE, Effects and Shutter Effects, etc., | output. |
|
| ||||||
and can be used to confirm how these functions | SOUND R |
| : Sound from the “R” channel is | ||||||
| |||||||||
operate. Demonstration starts in the following | output. |
|
| ||||||
cases: |
|
|
|
|
|
|
| ||
● When the Menu Screen is closed after “DEMO | NARRATION |
|
| ||||||
MODE” is turned “ON”. | Although it is not possible to perform audio | ||||||||
● With “DEMO MODE” set to “ON”, if there is no | dubbing with this camcorder, you can hear | ||||||||
operation for about 3 minutes after the Power | sound from an | ||||||||
Switch is set to “REC”. | |||||||||
playback using this function. | |||||||||
● Performing any operation during the | |||||||||
[OFF]: Original sound is output on both “L” and | |||||||||
demonstration stops the demonstration | |||||||||
“R” channels in stereo. | |||||||||
temporarily. If no operation is performed for more | |||||||||
ON: Dubbed sound is output on both “L” and “R” | |||||||||
than 3 minutes after that, the demonstration will | |||||||||
channels in stereo. | |||||||||
resume. | |||||||||
MIX: Original and dubbed sounds are combined | |||||||||
NOTES: | |||||||||
and output in stereo on both “L” and “R” | |||||||||
● If a cassette is in the camcorder, the | channels. |
|
| ||||||
demonstration cannot be turned on. |
|
| |||||||
|
|
|
|
|
|
| |||
● “DEMO MODE” remains “ON” even if the | BRIGHT |
|
| ||||||
camcorder power is turned off. | ☞ pg. 15, “Brightness Adjustment Of The | ||||||||
● If “DEMO MODE” remains “ON”, some functions | |||||||||
Display” |
|
| |||||||
will not be available. After viewing demo, set to |
|
| |||||||
“OFF”. |
|
|
|
|
|
|
| ||
DATE/TIME |
| [OFF] / ON | |||||||
|
|
| |||||||
FEATURES
Playback Menus
[ ] =
SOUND MODE and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on page 22, select “SOUND MODE” or “NARRATION” from the Menu Screen and set it to the desired parameter.
The settings below are effective only for video playback except “REC MODE” and “BRIGHT”. The parameters (except “OFF” in ON SCREEN, SOUND MODE and NARRATION settings) are the same as in the description on page 23, 24.
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
ON SCREEN | OFF / [LCD] / LCD/TV |
When set to “OFF”, the camcorder’s display disappears.
TIME CODE | [OFF] / ON |
☞pg. 18, “Time Code”
ADVANCED
REC MODE | [SP*] / LP |
Allows you to set the video recording mode (SP or LP) depending on your preference.
* SP indicator does not appear on the screen.