MENUS FOR DETAILED ADJUSTMENT EN 23
Recording Menus | SETTING |
|
FUNCTION
The menu settings can be changed only when the Power Switch is set to “REC”.
[ ] =
WIPE/FADER
( pg. 30), “Wipe or Fader Effects”
The menu settings can be changed only when the Power Switch is set to “REC”.
[ ] =
REC MODE
[SP*]: To record in the SP (Standard Play) mode
LP: Long
* SP indicator does not appear on the screen.
EFFECT
( pg. 31), “Program AE, Effects And Shutter Effects”
PROGRAM AE
( pg. 31), “Program AE, Effects And Shutter Effects”
SHUTTER
( pg. 31), “Program AE, Effects And Shutter Effects”
EXPOSURE
( pg. 27), “Exposure Control”
W. BALANCE
( pg. 29), “White Balance Adjustment”
TELE MACRO
[OFF]: Disables the function.
ON: When the distance to the subject is less than 1 m, set “TELE MACRO” to “ON”. You can shoot a subject as large as possible at a distance of approx. 40 cm.
Depending on the zoom position, the lens may go out of focus.
NOTES:
●If the recording mode is switched, the playback picture will be blurred at the switching point.
●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.
●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.
SOUND MODE
[12BIT]: Enables video recording of stereo sound on four separate channels. (Equivalent to the 32 kHz mode of previous models)
16BIT: Enables video recording of stereo sound on two separate channels. (Equivalent to the 48 kHz mode of previous models)
DIS
OFF: Disables the function.
[ON 
]: To compensate for unstable images caused by
NOTES:
●Accurate stabilization may not be possible if hand shake is excessive, or depending on the shooting condition.
●The “
” indicator blinks or goes out if the Stabilizer cannot be used.
Switch off this mode when recording with the camcorder on a tripod.
ADVANCED FEATURES