24 EN MENUS FOR DETAILED ADJUSTMENT
ZOOM
[28X]: When set to “28X” while using digital zoom, the zoom magnification will reset to 28X since digital zoom will be disengaged.
56X: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 28X (the optical zoom limit), to a maximum of 56X digital magnification. 800X: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 28X (the optical zoom limit), to a maximum of 800X digital magnification.
GAIN UP
PRIORITY
[LCD]: The image is displayed on the LCD monitor when the viewfinder is pulled out while the LCD monitor is opened.
FINDER: The image is displayed in the viewfinder when the viewfinder is pulled out while the LCD monitor is opened.
DISPLAY
●The menu settings can be changed only when the Power Switch is set to “REC”.
●The “DISPLAY” settings except “BRIGHT” and “LANGUAGE” are effective only for shooting.
[ ] =
OFF: Allows you to shoot dark scenes with no picture brightness adjustment.
[AGC]: The overall appearance may be grainy, but the image is bright.
AUTO 
: The shutter speed is automatically adjusted. Shooting a subject in low or poor lighting at slow shutter speed provides a brighter image than in the AGC mode, but the subject’s movements are not smooth or natural. The overall appearance may be grainy. While the shutter speed is being automatically adjusted,
“
” is displayed.
WIND CUT
[OFF]: Disengages the function.
ON 
: Helps cut down on noise created by wind. The “
” indicator appears. The quality of the sound will change. This is normal.
SYSTEM
The “SYSTEM” functions which are set when the Power Switch is set to “REC” are also applied when the Power Switch is set to “PLAY”. [ ] =
MELODY
OFF: Even though not heard while shooting, shutter sound is recorded on the tape.
[ON]: A melody sounds when any operation is performed. It also activates the shutter sound effect. ( pg. 26)
CAM RESET
BRIGHT
☞pg. 15, “Brightness Adjustment Of The Display”
CLOCK ADJ.
☞pg. 15, “Date/Time Settings”
LANGUAGE
[ ] / ENGLISH / B.MELAYU
The language setting can be changed. ( pg. 14)
DATE/TIME
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
ON SCREEN
LCD: Keeps the camcorder’s display (except the date, time and time code) from appearing on the connected TV screen.
[LCD/TV]: Makes the camcorder’s display appear on screen when the camcorder is connected to a TV.
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. ( pg. 18)
EXECUTE: Resets all settings to the factory- preset.
[RETURN]: Does not reset all settings to the