JVC GR-D93, GR-D73, GR-D33 instruction manual EN Video Recording, Tape Remaining Time

Page 12

12 EN VIDEO RECORDING

 

LCD Monitor And Viewfinder

Zooming

While using the LCD monitor:

Make sure the viewfinder is pushed back in. Press the Monitor Opening Button and open the LCD monitor fully. It can rotate 270° (90° downward, 180° upward).

While using the viewfinder:

Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully.

●Be sure to pull out the viewfinder until you hear a click, otherwise it may be pushed back in during use.

Produces the zoom in/out effect, or an instantaneous change in image magnification.

Zoom In

Slide the Power Zoom Lever towards “T”.

Zoom Out

Slide the Power Zoom Lever towards “W”.

●The further you slide the Power Zoom Lever, the quicker the zoom action.

Monitor Opening Button

NOTES:

●The image will not appear simultaneously on the LCD monitor and the viewfinder. When the viewfinder is pulled out while the LCD monitor is opened, you can select which one to use. Set “PRIORITY” to the desired mode in SYSTEM Menu. ( pg. 25, 27)

●Colored bright spots may appear all over the LCD monitor or the viewfinder. However, this is not a malfunction.

( pg. 42)

Tape Remaining Time

Approximate tape remaining time appears on the display. “– h – – m” means the camcorder is calculating the remaining time. When the remaining time reaches

2 minutes, the indication starts blinking.

0h 25 m

–h– – m 1 h 0 m 0 h 5 9 m 0 h 3 m (Now calculating)

0 h 0 m 0 h 1 m 0 h 2 m

Zoom in (T: Telephoto)

1 xW

T

 

 

 

 

1 0 xW

T

 

 

 

 

20xW

T

 

 

 

 

40xW

T

Zoom out (W: Wide angle)

1 0 x WT

Digital zoom zone

16X (10X for GR-D93) (optical) zoom zone

Approximate zoom ratio

NOTES:

●Focusing may become unstable during Zooming. In this case, set the zoom while in Record-Standby, lock the focus by using the manual focus ( pg. 32), then zoom in or out in Record mode.

●Zooming is possible to a maximum of 700X, or it can be switched to 16X (10X for GR-D93) magnification using the optical zoom. ( pg. 26)

●Zoom magnification of over 16X (10X for GR-D93) is done through Digital image processing, and is therefore called Digital Zoom.

●During Digital zoom, the quality of image may suffer.

●Digital zoom cannot be used when the VIDEO/MEMORY Switch is set to “MEMORY”. (GR-D93/73 only)

●Macro shooting (as close as approx. 5 cm (2") to the subject) is possible when the Power Zoom Lever is set all the way to “W”. Also see “TELE MACRO” in MANUAL Menu on page 26.

(Blinking) (Blinking) (Blinking)

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Digital Still Camera D.S.C. Recording & Playback GR-D93/D73 Dear CustomerFor Customer Use LYT1196-001C ENSafety Precautions Important Safty Instructions Before recording an important scene…EN Contents Provided Accessories How To Attach The Lens CapHow To Attach The Shoulder Strap Getting Started ENPower Charging The Battery PackEN Getting Started Video CableUsing The Battery Pack Grip AdjustmentUsing AC Power Colder temperaturesOperation Mode Date/Time SettingsPower-Linked Operation InformationViewfinder Adjustment Diopter Adjustment ControlTripod Mounting StartedTo switch the recording mode, refer to pages 25 Loading/Unloading a CassetteClose the card cover OPEN/EJECTPush POWER/CHARGE lamp Power Switch Lock Button Recording Start/Stop ButtonBasic Recording Video Recording ENEN Video Recording Tape Remaining TimeJournalistic Shooting Recording From The Middle Of a Tape Self RecordingTime Code VideoNormal Playback EN Video PlaybackShuttle Search Blank SearchInstalling The Battery Buttons And FunctionsBeam Effective Area indoor use PlaybackPlayback Zoom Frame-By-Frame PlaybackPlayback Special Effects Slow-Motion PlaybackIf using a VCR, go to . If not, go to step Connections To a TV Or VCRPlayback White to Audio L Red to Audio R Yellow to Video To S-VIDEOApproximate Number of Storable Images Dubbing Still Images Recorded On a Tape To a Memory Card Normal Playback Of Images Auto Playback Of ImagesIndex Playback Of Files Battery indicator disappear Operation mode indicator Folder/file numberViewing File Information Removing On-Screen DisplayProtecting Files Deleting FilesTo Remove Protection To protect all files stored in the memory cardTo Reset The Number Of Prints Setting Print Information Dpof SettingTo Print By Selecting Still Images And Number Of Prints To Print All Still Images One Print For EachResetting The File Name Initializing a Memory CardFolder and File names Open the LCD monitor fully.  pgChanging The Menu Settings Advanced FeaturesMenus without Sub Menus Menus with Sub MenusEN Menus for Detailed Adjustment Recording MenusAuto  pg , Brightness Adjustment Of The Display  pg , Date/Time SettingsWhen the Menu Screen is closed after Demo Mode is turned on Fine / StandardPlayback Menus LCD / FinderExecute / Return On Screen OFF / LCD / LCD/TVNight Alive White LED LightTo deactivate Night-Alive EN Features for Recording Select OFF in . The effect indicator disappearsWipe Or Fader Effects Program AE With Special EffectsMotor Drive Mode FeaturesAuto Focus Snapshot For Video RecordingManual Focus Iris LockExposure Control To return to automatic exposure controlWhite Balance Adjustment To change the settingBacklight Compensation To lock the exposure control and the irisEN Editing Dubbing To Or From a VCRTo use this camcorder as a recorder GR-D93/73 OnlyEquipped With a DV Connector Digital DubbingTo use this camcorder as a recorder Using DV cable Using USB cable Using DV cableIt is possible to do the following things GR-D93/73 only orAudio Dubbing GR-D93/73 only Insert Editing GR-D93/73 onlyEditing EN Set Narration to on or MIX.  pgEN Additional Information Loading/Unloading a Cassette pgVideo Playback pg C. Recording GR-D93/D73 only pgReferences EN Troubleshooting PowerVideo and D.S.C. Recording Video and D.S.C. PlaybackAdvanced features Other problems Power Switch is set to a HSet the Power Switch to M.  pgSubject is too bright HSet r to SPOTLIGHT.  pg Places subject to low temperature, images become dark HPush in the memory card a few more times.  pgViewfinder is pulled out and Priority is set to Monitor fully.  pgDisplays the battery remaining power GR-D93/73 only While the Power Switch is set to a or MVIDEO/MEMORY Switch GR-D93/73 only is set to Appears if Insert I on the remote control isCard Error Battery Packs Using Household AC Plug AdapterCassettes Memory Cards GR-D93/73 onlyHow To Handle a CD-ROM EN CautionsLCD Monitor Main UnitAbout moisture condensation Serious malfunctioningDeclaration of Conformity Cleaning The Camcorder EN User MaintenanceSlide BATT.RELEASE 1 and remove the battery pack After UseCamcorder AC AdapterEN Index Connectors IndicatorsControls Other PartsIndex During D.S.C. Recording Only GR-D93/73 onlyBright Blank Search Push Stop Button To Cancel During Video PlaybackDuring D.S.C. Playback GR-D93/73 only MICTerms Wide Mode Wide Mode Terms ENTerms Video/AV input S/AV Input 28, 34GR-D93 GR-D73 GR-D33
Related manuals
Manual 40 pages 40.4 Kb
Top Page Image Contents