VIDEO PLAYBACK EN 17
Connections To A TV Or VCR
These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.
To AV | To S |
Audio/Video | |
cable | (optional) |
(provided) |
|
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as shown in the illustration.
If using a VCR, go to step 3. If not, go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
To choose whether or not the following displays appear on the connected TV
●Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 25, 28) Or, press DISPLAY on the remote control (provided with
●Time Code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 25, 28)
●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 25, 28)
NOTES:
& PLAYBACK
1 
2 
3 
4
VCR
TV |
● It is recommended to use the AC Adapter as the power |
supply instead of the battery pack. ( pg. 7) |
● To monitor the picture and sound from the camcorder |
without inserting a tape or memory card*, set the |
camcorder’s Power Switch to “A” or “M”, then set your TV |
to the appropriate input mode. |
* |
● Make sure you adjust the TV sound volume to its minimum |
level to avoid a sudden burst of sound when the camcorder |
VIDEO RECORDING
A White to AUDIO L IN*
B Red to AUDIO R IN*
C Yellow to VIDEO IN**
DTo S-VIDEO IN***
*Not required for watching still images only.
**Connect when your TV/VCR has only A/V input connectors.
***Connect when your TV/VCR has
is turned on. |
● If you have a TV or speakers that are not specially shielded, |
do not place the speakers adjacent to the TV as |
interference will occur in the camcorder playback picture. |
● When a cable is connected to the AV connector, the sound |
is not heard from the speaker. |