ADDITIONAL FEATURES FOR D.S.C. (GR-D93/D73 only) EN 23
To delete all files stored in the memory card
6 Rotate the MMENU/VOL. Wheel to select “ALL”, and press it. The DELETE screen appears.
7 Rotate the MMENU/VOL. Wheel to select “EXECUTE”, and press it.
●To cancel deletion, select “RETURN”.
NOTES:
●Protected files ( pg. 22) cannot be deleted. To delete them, remove protection first.
●Once files are deleted, they cannot be restored. Check files before deleting.
CAUTION:
Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during deletion. If the memory card becomes corrupted, initialize it. ( pg. 24)
Setting Print Information (DPOF Setting)
This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing. You can select one of the 2 print information settings for images stored in the memory card: “To Print All Still Images (One Print For Each)” or “To Print By Selecting Still Images And Number Of Prints”.
NOTES:
●If you load a memory card already set as shown below in a printer compatible with DPOF, it will make prints of the selected still images automatically.
●To print images recorded on a tape, first dub them to a memory card. ( pg. 19)
To Print All Still Images (One Print For Each)
1 Load a memory card. ( pg. 10)
2 Set the VIDEO/MEMORY Switch to “MEMORY”.
3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
●A stored file is displayed.
4 Press the MMENU/VOL. Wheel in. The Menu Screen appears.
5 Rotate the MMENU/VOL. Wheel |
|
|
| |
to select “DPOF”, and press it. The | MENU | |||
Sub Menu appears. | DPOF CURRENT | |||
6 Rotate the MMENU/VOL. Wheel |
| ALL 1 |
| |
| RESET | |||
to select “ALL 1”, and press it. The |
| RETURN | ||
DPOF screen appears. |
|
|
| |
7 Rotate the MMENU/VOL. Wheel | DPOF | |||
to select “EXECUTE”, and press it. | ||||
|
|
| ||
The normal playback screen |
|
|
| |
appears. | ALL 1 ? | |||
To Print By Selecting Still Images And Number Of Prints
1 Perform steps 1 – 5 in “To Print All Still Images (One Print For Each)”.
2 Rotate the MMENU/VOL. Wheel to select “CURRENT”, and press it. The DPOF screen appears.
3 Press 3 or 5 to select the desired file.
4 Rotate the MMENU/VOL. Wheel
to select the number indication (00), and press it.
5 Select the number of prints by
rotating the MMENU/VOL. Wheel | DPOF | ||
|
|
| |
towards “+” to increase number, or |
|
|
|
towards | SHEETS | ||
number, and press it. |
|
|
|
0 5 |
| ||
● Repeat steps 3 through 5 for the desired number of prints.
●The number of prints can be set up to 15.
●To correct the number of prints, select the image again and change the number.
6 Rotate the MMENU/VOL. Wheel
to select “RETURN”, and press it. | DPOF |
| |
The “SAVE?” appears. |
|
● If you did not change any settings in | SAVE? |
step 3 through 5, the Menu Screen |
|
EXECUTE | |
reappears. | CANCEL |
7 Rotate the MMENU/VOL. Wheel
to select “EXECUTE” to save the setting you have just made, and press it.
●To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1 Perform steps 1 – 5 in “To Print All Still Images (One Print For Each)”.
2 Rotate the MMENU/VOL. Wheel to select “RESET”, and press it. The DPOF screen appears.
3 Rotate the MMENU/VOL. Wheel to select
“EXECUTE”, and press it. The normal playback screen appears.
●To cancel selection, select “RETURN”.
●The number of prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power, as this may cause the memory card to be corrupted.
DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
● To cancel selection, select |
|
EXECUTE | |
“RETURN”. | RETURN |