16 EN VIDEO PLAYBACK
Playback Zoom
SLOW Rewind
Button
Left Button
Down Button or STOP
SHIFT
Slow-Motion Playback
T
W
Up Button
or PAUSE
SLOW Forward
Button
Right Button
PLAY
Zoom Buttons
Magnifies the recorded image up to 44X (70X for
1) Press PLAY (U) to start video playback. Or perform normal playback of images.
2)At the point you want to zoom in, press
the Zoom Button (T).
●To zoom out, press the Zoom Button (W).
Allows
During normal video playback, press SLOW (YI or IU) more than approx. 2 seconds.
●After approx. 5 minutes (1 minute for
●To pause
●To stop
NOTES:
●You can also engage
●During
●After SLOW (YI or IU) is pressed and held, the still image may be displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction.
●There may be a small margin between the
●During
Frame-By-Frame Playback
Allows
During normal or still playback, press SLOW (IU) repeatedly for forward or SLOW (YI) repeatedly for reverse. Each time SLOW (YI or IU) is pressed, the frame is played back.
3)You can move the image on the screen
around to find a particular portion of the picture. While holding down SHIFT, press L (Left), F (Right), U (Up) and E (Down).
● To end zoom, press and hold W until magnification returns to normal. Or, press STOP (8) and then press PLAY (U) during video playback.
NOTES:
●Zoom can also be used during
●Due to digital image processing, the quality of the image may suffer.
Playback Special Effects
Allows you to add creative effects to the video playback image.
The effects that can be used during playback are CLASSIC FILM, MONOTONE, SEPIA and STROBE. The effects work the same in playback as they did in recording. ( pg. 30)
CLASSIC FILM: Gives recorded scenes a strobe effect.
MONOTONE: Like classic black and white films, your footage is shot in B/W. Used together with the Cinema mode, it enhances the “classic film” effect.
SEPIA: Recorded scenes have a brownish tint like old photos. Combine this with the Cinema mode for a classic look.
STROBE: Your recording looks like a series of consecutive snapshots.
1)To start playback,
press PLAY (U). | EFFECT |
2) Press EFFECT. | EFFECT ON/OFF |
The PLAYBACK |
|
EFFECT Select Menu |
|
appears. |
|
3) Press EFFECT | T |
repeatedly to move | W |
| |
the highlight bar to the |
|
desired effect. |
|
●The selected function is activated and after 2 seconds the menu disappears.
●To deactivate the selected effect, press EFFECT ON/OFF. To reactivate the selected effect press EFFECT ON/OFF again.
●To change the selected effect, repeat from step 2 above.