JVC GR-D93, GR-D73, GR-D33 instruction manual Dubbing, Equipped With a DV Connector Digital

Page 35
Turn on the video unit’s power.
Insert the source cassette in this camcorder. Insert the recording cassette in the video unit.

 

EDITING EN 35

Dubbing To Or From A Video Unit

NOTES:

● It is recommended to use the AC Adapter as the power

Equipped With A DV Connector (Digital

supply instead of the battery pack. ( pg. 7)

 

Dubbing)

● If the remote control is used when both the player and

recorder are JVC video units, both units will perform the

 

same operation. To prevent this from happening, press the

It is also possible to copy recorded scenes from the

buttons on both units. (GR-D93/73 only)

camcorder onto another video unit equipped with a DV

● If a blank portion or disturbed image is played back on the

connector. Since a digital signal is sent, there is little if

player during dubbing, the dubbing may stop so that an

any image or sound deterioration.

unusual image is not dubbed.

● Even though the DV cable is connected correctly,

 

 

sometimes the image may not appear in step 9. If this

 

occurs, turn off the power and make connections again.

 

● If “Playback Zoom” ( pg. 16) or “Playback Special Effects”

 

( pg. 16) is attempted (GR-D93/73 only) or SNAPSHOT

 

is pressed during playback, only the original playback

 

image recorded on the tape is output from the DV IN/OUT

 

connector.

 

● When using a DV cable, be sure to use the optional

 

JVC VC-VDV204U DV cable.

Core filter

To DV IN/OUT

DV cable (optional)

To DV IN/OUT

Video unit equipped with DV connector

To use this camcorder as a recorder

1)Perform steps 1 to 4 in “To use this camcorder as a player”.

2)Set “REC MODE” to “SP” or “LP”. ( pg. 25, 26)

3)Insert the recording cassette in this camcorder.

4)Press the Recording Start/Stop Button to engage the Record-Pause mode.

● The “ DV. IN ” indication appears on the screen.

5)Press the Recording Start/Stop Button to start recording. The T indication rotates.

6)Press the Recording Start/Stop Button again to stop recording. The T indication stops rotating.

NOTES:

●If no image is displayed on the LCD monitor, set “S/AV INPUT” to “OFF”. ( pg. 25, 28) (GR-D93/73 only)

●Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting. ( pg. 26)

ADVANCED FEATURES

To use this camcorder as a player

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.

3 Set this camcorder’s VIDEO/MEMORY Switch to “VIDEO”. (GR-D93/73 only)

4 Set this camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

5

6

7

8 Press 4/9 on this camcorder to start playback of the source cassette.

9 At the point you want to start dubbing, engage the video unit’s Record mode.

10 To pause dubbing, engage the video unit’s Record- Pause mode and press 4/9 on this camcorder.

11 Repeat steps 8 – 10 for additional editing. Stop the video unit and camcorder.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents LYT1196-001C EN Digital Still Camera D.S.C. Recording & Playback GR-D93/D73Dear Customer For Customer UseSafety Precautions Before recording an important scene… Important Safty InstructionsEN Contents Getting Started EN Provided AccessoriesHow To Attach The Lens Cap How To Attach The Shoulder StrapVideo Cable PowerCharging The Battery Pack EN Getting StartedColder temperatures Using The Battery PackGrip Adjustment Using AC PowerInformation Operation ModeDate/Time Settings Power-Linked OperationStarted Viewfinder AdjustmentDiopter Adjustment Control Tripod MountingOPEN/EJECT To switch the recording mode, refer to pages 25Loading/Unloading a Cassette Close the card coverVideo Recording EN Push POWER/CHARGE lampPower Switch Lock Button Recording Start/Stop Button Basic RecordingTape Remaining Time EN Video RecordingVideo Journalistic Shooting Recording From The Middle Of a TapeSelf Recording Time CodeBlank Search Normal PlaybackEN Video Playback Shuttle SearchPlayback Installing The BatteryButtons And Functions Beam Effective Area indoor useSlow-Motion Playback Playback ZoomFrame-By-Frame Playback Playback Special EffectsWhite to Audio L Red to Audio R Yellow to Video To S-VIDEO If using a VCR, go to . If not, go to stepConnections To a TV Or VCR PlaybackApproximate Number of Storable Images Dubbing Still Images Recorded On a Tape To a Memory Card Index Playback Of Files Normal Playback Of ImagesAuto Playback Of Images Removing On-Screen Display Battery indicator disappearOperation mode indicator Folder/file number Viewing File InformationTo protect all files stored in the memory card Protecting FilesDeleting Files To Remove ProtectionTo Print All Still Images One Print For Each To Reset The Number Of PrintsSetting Print Information Dpof Setting To Print By Selecting Still Images And Number Of PrintsOpen the LCD monitor fully.  pg Resetting The File NameInitializing a Memory Card Folder and File namesMenus with Sub Menus Changing The Menu SettingsAdvanced Features Menus without Sub MenusAuto EN Menus for Detailed AdjustmentRecording Menus Fine / Standard  pg , Brightness Adjustment Of The Display pg , Date/Time Settings When the Menu Screen is closed after Demo Mode is turned onOn Screen OFF / LCD / LCD/TV Playback MenusLCD / Finder Execute / ReturnTo deactivate Night-Alive Night AliveWhite LED Light Program AE With Special Effects EN Features for RecordingSelect OFF in . The effect indicator disappears Wipe Or Fader EffectsSnapshot For Video Recording Motor Drive ModeFeatures Auto FocusTo return to automatic exposure control Manual FocusIris Lock Exposure ControlTo lock the exposure control and the iris White Balance AdjustmentTo change the setting Backlight CompensationOnly EN EditingDubbing To Or From a VCR To use this camcorder as a recorder GR-D93/73To use this camcorder as a recorder Equipped With a DV Connector DigitalDubbing GR-D93/73 only or Using DV cableUsing USB cable Using DV cable It is possible to do the following thingsSet Narration to on or MIX.  pg Audio Dubbing GR-D93/73 onlyInsert Editing GR-D93/73 only Editing ENLoading/Unloading a Cassette pg EN Additional InformationReferences Video Playback pgC. Recording GR-D93/D73 only pg Video and D.S.C. Playback EN TroubleshootingPower Video and D.S.C. RecordingSubject is too bright HSet r to SPOTLIGHT.  pg Advanced features Other problemsPower Switch is set to a HSet the Power Switch to M.  pg Monitor fully.  pg Places subject to low temperature, images become darkHPush in the memory card a few more times.  pg Viewfinder is pulled out and Priority is set toAppears if Insert I on the remote control is Displays the battery remaining power GR-D93/73 onlyWhile the Power Switch is set to a or M VIDEO/MEMORY Switch GR-D93/73 only is set toCard Error Memory Cards GR-D93/73 only Battery PacksUsing Household AC Plug Adapter CassettesMain Unit How To Handle a CD-ROMEN Cautions LCD MonitorDeclaration of Conformity About moisture condensationSerious malfunctioning After Use Cleaning The CamcorderEN User Maintenance Slide BATT.RELEASE 1 and remove the battery packAC Adapter CamcorderEN Index Other Parts ConnectorsIndicators ControlsBright IndexDuring D.S.C. Recording Only GR-D93/73 only MIC Blank Search Push Stop Button To CancelDuring Video Playback During D.S.C. Playback GR-D93/73 onlyTerms Video/AV input S/AV Input 28, 34 Wide Mode Wide ModeTerms EN TermsGR-D93 GR-D73 GR-D33
Related manuals
Manual 40 pages 40.4 Kb
Top Page Image Contents