VIDEO RECORDING EN 11
Basic Recording
NOTE:
Before continuing, perform the procedures listed below:
●Power ( pg. 6)
●Loading A Cassette ( pg. 10)
Push.
POWER/CHARGE lamp | Power Zoom Lever | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power Switch
Lock Button
Recording Start/Stop Button
1 Remove the lens cap.
2 Open the LCD monitor fully. ( pg. 12)
3 Set the VIDEO/MEMORY Switch to “VIDEO”.
4 Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.
●The POWER/CHARGE lamp lights and the camcorder enters the
●To record in LP (Long Play) mode, pg. 25, 26.
5 To start recording, press the Recording Start/Stop Button. The “T REC” appears on the display while recording is in progress.
6 To stop recording, press the Recording Start/Stop Button again. The camcorder
NOTES:
●The image will not appear simultaneously on the LCD monitor and the viewfinder.
●If the
●LCD monitor/viewfinder indications:
•When power is supplied from a battery: the “
” battery indicator is displayed. ( pg. 43)
•When power is supplied from an AC outlet: the “
” battery indicator does not appear.
●When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape. To avoid this, refer to “Recording From The Middle Of A Tape” ( pg. 13).
●To turn the beep sounds off, pg. 25, 27.
●For other notes, pg. 38.