JVC GR-DV3000 specifications 56 EN, Connections Advanced Connections

Page 56
Make sure the camcorder and PC are turned off.

56 EN

CONNECTIONS Advanced Connections

Power Switch

VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)

To DV

To

IN/OUT

USB

Core filter

DV cable

USB cable

(optional)

(provided)

Core filter

OR

To DV

To USB

connector

connector

PC with DV connector

USB-equipped PC

Connection To A Personal Computer

This camcorder can transfer still images to a PC via DV or USB connection as shown in the illustration.

1

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 If you are using the USB connection, set the VIDEO/MEMORY switch to “MEMORY”.

•Only the still images stored on the memory card can be transferred to a PC.

4 Turn the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

•If the PC connected to the camcorder via the USB cable is not powered on, the camcorder does not enter the USB mode.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack ( pg. 9).

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and provided Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.

“ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC. Never disconnect the USB cable while “ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.

Page 55 Page 57
Image 56
Page 55 Page 57
Contents GR-DV3000 Dear Customer It is recommended that youInstallation Antenna Installation InstructionsUSE ServicingBefore recording an important scene How To Attach The Lens Cap CD-ROMHow To Detach/Attach The Lens Hood How To Use Audio CablesPower Charging the Battery PackBattery pack Fully charging time About BatteriesUsing the Battery Pack Using AC PowerTo Detach The Battery Pack Playback mode is engaged repeatedlyGrip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings Power Switch Power Lamp Lock ButtonApproximate recording time Tape Recording mode 12 ENLoading/Unloading a Cassette To Protect Valuable RecordingsTo Protect Valuable Files available only for SD Memory Card Loading a Memory CardTo Unload a Memory Card Operation Mode 14 ENOFF VideoRecording Mode Setting Power Switch Power Lamp Lock Button Menu WheelDisplay Menu ScreenPicture Quality/Image Size Setting 16 ENStorage Capacity Approximate number of storable imagesImage Size Quality SD Memory Card optional 16 MB 32 MB 64 MBTo Adjust The Brightness Of The Display 18 ENBasic Recording Recording On Tape To Stop RecordingJournalistic Shooting Interface ShootingSnapshot Mode Selection 20 ENSnapshot For Tape Recording Snapshot RecordingWhen unwanted still images are stored Basic Shooting SnapshotPress Snapshot To Delete Unwanted Still ImagesFeature Zooming 22 ENBasic Recording Recording On Tape And Memory Card ZoomWhen a blank portion is recorded on a tape Proper recordingTo obtain correct focus 24 ENBasic Recording Recording On Tape And Memory Card To Control The Speaker Volume Basic Playback Playback From TapeAuto Playback 26 ENNormal Playback Removing On-Screen Display Index PlaybackViewing File Information 28 EN For Recording MenuMenu Screen Explanations Wide Mode Manual Wind CUT SystemCinema WideCAM Cancel Reset ExecuteSystem Display Title WVIDEO/MEMORY Switch 32 ENFor Playback Menu Lock Button Menu WheelDisplay Sound Mode 12BIT ModePlayback Sound Self-Timer 34 ENTo Take a Snapshot In The 5-Second Recording Mode Second RecordingInstead of pressing the Recording Start/Stop  pg this function is not available36 EN Fade/Wipe EffectsTo Deactivate The Selected Effect To activate the Fade-in or Wipe-inFader And Wipe Menu To Deactivate The Selected Mode 38 ENNight-Alive Program AE With Special EffectsShutter SnowSpotlight TwilightIris Lock 40 ENExposure Control To Return To Automatic White Balance White Balance AdjustmentManual White Balance Operation To cancel Navigation Search midway 42 ENNavigation Function To Make Thumbnail Images During Tape RecordingTo ADD Thumbnail Images During Tape Playback To Delete Thumbnail ImagesTo cancel Blank Search midway Power Switch Lock Button Stop Button Menu Wheel44 EN PressSound Effect Mode Selection To cancel recording the sound effect midwayDigital Sound Effects Sound Effect Recording46 EN To Make Video Clips from REAL-TIME Camera ImageApproximate recording time SD Memory Image Size Card 32 MBTo cancel E-Mail Clip Recording To Make Video Clips from Recorded Video FootageAfter , press E-MAILagain or press 5to Stop tape playback To view video clips stored on a memory card48 EN Title SelectionTitle Recording System and press itBefore doing the following, perform steps 1 through 4 above Protecting FilesTo Remove Protection To cancel deletion, select Return 50 ENDeleting Files Delete ScreenMaking a New Folder Initializing a Memory CardFolder and File names You can initialize a memory card anytimeTo Print ALL Still Images ONE Print for Each To Reset The Setting52 EN Display Dpof Screen To Reset The No. Of PrintsTo Print by Selecting Still Images NO. of Prints VCR 54 ENConnections Basic Connections If using a VCR . . . go to step If not . . . go to step 56 EN Connections Advanced ConnectionsUsing The Camcorder As a WebCam This camcorder can be used as a WebCam via USB connectionTo use this camcorder as a player 58 ENDubbing To a VCR Power Switch Connector Cover**To Dubbing From a VCRTo Use This Camcorder As a Recorder To AV Audio/Video cable provided White toCore filter DV cable optional To DV 60 ENTo use this camcorder as a player Play/Pause Button 4/6 Menu Wheel Dubbing Still Images Recorded On a Tape To a Memory CardButton Lock Button Installing The Batteries 62 ENTab  pg Remote sensorButtons Functions64 EN To allow frame-by-frame search during tape playbackUp Button Left or SlowSelect Menu To start playback, press Play To change the selected effect, repeat from above VCR Recording deck 66 ENSET REMOTE/VCR Code VCR other than above JVC VCR equipped with a remote pause connectorMake Connections 68 EN Select ScenesDissolve Wipe DoorEditing Menu Automatic Editing to VCROn Next Adjustment of VCR/CAMCORDER Timing 70 ENFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingPause Stop Power Switch Lock Button Remote sensorInsert Editing Set 12BIT Mode to Sound 2 or MIX Menu Screen  pg 72 ENAudio Dubbing To hear the dubbed sound during playbackAudio Dubbing Using Digital Sound Effects Display 6e Audio Dub Standby modeWhen recording Out the viewfinder VIDEO/MEMORY Switch is set74 EN To VideoLight in the Menu Screen Video  pg76 EN Bright spots of light red, green or Image color on the LCD Edge of the LCD monitor isViewfinder 78 EN Set the VIDEO/MEMORYCheck the section of the manual That explains LCD monitorViewfinder indications Occurred. In this caseCleaning The Camcorder BATT. Release Switch Hatch Lens blower80 EN After UseIndex Jack Box Index Controls, Connectors And Indicators RtyE pg Speaker/Headphone Volume Control Power SwitchDiopter Adjustment Control VIDEO/MEMORY Switch84 EN Index Indications1280 Displays the image sizePhoto Displays the sound mode  pg Displays the Blank Search mode Volume86 EN LCD Monitor/Viewfinder Indications During Tape PlaybackIndications Function 88 EN Using Household AC Plug Adapter 90 EN About moisture condensation Serious malfunctioningDeclaration of Conformity Model Number Trade Name92 EN Random Assemble Editing SD Memory CardUnload a Tape WebCamStandard 94 ENFine Phone PrinterVTR USBGR-DV3000
Related manuals
Manual 2 pages 1.44 Kb

GR-DV3000 specifications

The JVC GR-DV3000 is a compact digital camcorder that impresses with its advanced features and user-friendly design. Intended for enthusiasts and professionals alike, this model caters to those who are looking for high-quality video capture in a portable format.

One of the standout features of the GR-DV3000 is its MegaPixel CCD image sensor. This technology provides enhanced image clarity and detail, allowing users to capture stunning 640 x 480 resolution still images along with high-quality video. The camcorder supports a variety of recording formats, including Mini DV, ensuring that users can easily transfer their footage to digital platforms for editing or sharing.

A highlight of the GR-DV3000 is its powerful 10x optical zoom lens, which allows for detailed close-up shots without compromising image quality. Coupled with a 700x digital zoom, users can explore further distances while retaining the ability to capture vivid detail. The lens features a fast aperture, making it easier to shoot in low-light conditions—a significant advantage for those shooting in diverse environments.

The camcorder also boasts a 2.5-inch LCD screen that provides clear playback and easy framing of shots. This screen is not only vital for composing your videos but also plays a crucial role during playback, allowing for an immersive viewing experience. Additionally, the GR-DV3000 is equipped with a night vision mode, making it possible to capture video even in near darkness, an essential feature for outdoor and low-light enthusiasts.

Audio quality is another strength of the GR-DV3000, thanks to its built-in stereo microphone and the ability to input external audio sources. This feature is crucial for capturing high-quality sound, whether in interviews or in a bustling outdoor setting.

The camcorder is designed with ease of use in mind, featuring a simple interface that allows for quick access to various settings and options. Its lightweight build makes it portable, perfect for on-the-go shooting, while the durable design ensures longevity—even with regular use.

Overall, the JVC GR-DV3000 combines a range of advanced technologies and user-friendly features, making it an excellent choice for anyone looking to create high-quality video content. Whether you're a budding filmmaker or a seasoned professional, this camcorder offers an impressive suite of tools to help you tell your story with clarity and impact.
Top Page Image Contents