EN 9
1 
2 
BATT. RELEASE Switch
ATTENTION
Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.
INFORMATION
The
AC Power Adapter/Charger
AC Power Adapter/Charger Read the kit's instruction manual before using. Neither
USING THE BATTERY PACK
1 With the arrow on the battery pack pointing upward, push the battery pack slightly against the battery pack mount 1.
2 Slide up the battery pack until it locks in place 2.
•If the battery pack is attached with its 
mark set in the wrong direction, a malfunction may occur.
To Detach The Battery Pack . . .
..... slide the battery pack down slightly while sliding
down BATT. RELEASE to detach it.
Approximate recording time
Battery | LCD monitor on/ | LCD monitor off/ | |
pack | Viewfinder off | Viewfinder on | |
|
|
| |
1 hr. 5 min. | 1 hr. 15 min. | ||
|
|
| |
2 hrs. 10 min. | 2 hrs. 30 min. | ||
(optional) | |||
|
| ||
|
|
| |
3 hrs. 50 min. | 4 hrs. 20 min. | ||
(optional) | |||
|
| ||
|
|
| |
5 hrs. 20 min. | 6 hrs. 10 min. | ||
(optional) | |||
|
| ||
|
|
| |
7 hrs. 30 min. | 8 hrs. 40 min. | ||
(optional) | |||
|
| ||
|
|
|
NOTES:
●Recording time is reduced significantly under the following conditions:
•Zoom or
•The LCD monitor is used repeatedly.
•The playback mode is engaged repeatedly.
●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.
USING AC POWER
Use the AC Power Adapter/Charger (connect as shown in the illustration).
NOTES:
●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.
●For other notes, pg. 8.
To AC outlet
| Power cord |
AC Power | To DC Input |
Adapter/ | |
Charger | connector |
| DC cord |
| To DC OUT |
| connector |
Jack Box