EN 7
How To Detach/Attach The Lens Hood
The provided lens hood helps block out glare when shooting under bright sunlight, the same way professional photographers do.
To detach:
Turn the lens hood counterclockwise.
Threading
To attach:
Align the lens hood with the camcorder’s lens and screw it in clockwise.
How To Use Audio Cables
When using an optional |
|
headphones, connect to |
|
the provided Audio cable |
|
(with a core filter attached), | Headphones |
then connect the Audio |
|
cable to the camcorder. |
|
The core filter reduces |
|
interference. |
|
Audio cable
To PHONE
Core Filter
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch is set to “ ” or “ ” and no cassette is in the camcorder.
Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.
“DEMO MODE” remains “ON” even if the camcorder power is turned off.
To cancel Automatic Demonstration:
1.Set the Power Switch to “ ” while pressing down the Lock Button located on the switch and press the MENU wheel in. The Menu Screen appears.
2.Rotate the MENU wheel to select “ SYSTEM” and press it. The SYSTEM Menu appears.
3.Rotate the MENU wheel to select “DEMO MODE” and press it. The Sub Menu appears.
4.Rotate the MENU wheel to select “OFF” and press it.
5.Rotate the MENU wheel to select “ RETURN”, and press it twice. The normal screen appears.
MENU Wheel
DEMO MODE – OF F
ON
Sub Menu