JVC GR-DV3000 specifications Image color on the LCD Edge of the LCD monitor is, Viewfinder

			EN 77
t
	SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
yTime code does not appear.		• “TIME CODE” is set to “OFF” in the	• Set “TIME CODE” to “ON” in the
		Menu Screen.	Menu Screen ( pg. 31, 32).
	Images on the LCD monitor	• In places subject to low tempera-	• Adjust the brightness and angle of
	appear dark or whitish.	ture, images become dark due to	the LCD monitor ( pg. 18, 19).
		the characteristics of the LCD
		monitor. When this happens, the
		displayed colors differ from those
		that are actually recorded. This is
		not a defect of the camcorder.
		• When the LCD monitor's fluores-
		cent light reaches the end of its
		service life, images on the LCD
		monitor become dark. Consult your
		nearest JVC dealer.
uThe rear of the LCD monitor		• The light used to illuminate the LCD	• Close the LCD monitor to turn it off
iis hot.		monitor causes it to become hot.	or set the Power Switch to “OFF”,
			and let the unit cool down.
	The indicators and the	• This may occur when the surface or
	image color on the LCD	the edge of the LCD monitor is	————
omonitor are not clear.		pressed.
	The LCD monitor or	• Certain Fade/Wipe effects, certain	• Re-read the sections covering
pviewfinder indications blink.		modes of Program AE with special	Fade/Wipe effects, Program AE
		effects, “DIS” and other functions	with special effects and “DIS”
		that cannot be used together are	( pg. 29, 36 – 39).
		selected at the same time.
	Colored bright spots appear	• The LCD monitor and the view-
	all over the LCD monitor or	finder are made with high-precision
	the viewfinder.	technology. However, black spots or
		bright spots of light (red, green or
		blue) may appear constantly on the
		LCD monitor or the viewfinder.
		These spots are not recorded on
		the tape. This is not due to any
		defect of the unit. (Effective dots:	————
		more than 99.99 %)

CONTINUED ON NEXT PAGE