JVC GR-AXM710 manual Advanced Features EN31, Fade/Wipe

RECORDING

[Ex.: Fader]

Fade in

AdvancedFeaturesEN31

Fade/Wipe

These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end or when you enter Record–Standby mode.

Display

MOSAIC

		1 MODESELECT OPERATION SYSTEM AND
	Fade out
			Set the System Select Switch to "VIDEO", and set the
			Power Switch to “PRO.”.
		2
After 2 sec.			MODEENGAGE FADE- OR WIPE-STANDBY
			Press EFFECT to cycle through the modes as shown at
			left. Once the desired mode appears, it is selected
			and reserved.
			•The selected mode’s name and its indication are
			displayed for approx. 2 seconds. Then the name
			disappears, and only the indication remains.

		FADER
		MOSAIC
		SHUTTER
		SLIDE
OFF	OFF
(No indication)

3 START OR END RECORDING

Press the Recording Start/Stop Button to activate fade- in/out or wipe-in/out.

4 TOMODECANCEL FADE- OR WIPE-STANDBY

Press EFFECT repeatedly until “OFF” appears.

•“OFF” is displayed for approx. 2 seconds and the fade/wipe standby mode is canceled.

FADER

Fades in/out to a black screen.

MOSAIC (Fader)

Gradually turns/returns the picture into/from a mosaic pattern.

SHUTTER (Wipe)

A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the center.

SLIDE (Wipe)

EFFECT Button	Power
	Switch

System Select Switch	Recording Start/Stop
	Button

A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.

NOTES:

●Pressing and holding the Recording Start/Stop Button allows you to vary the length for the image during fade in/out or wipe in/out.

●The screen becomes slightly reddish when the Fade/ Wipe is used with Sepia (☞ pg. 33).

●With the Electronic fog filter mode (☞ pg. 33) engaged, the image fades in/out to a white screen.

●Even if you start shooting with the Fade/Wipe indication displayed during Digital Still Camera Shooting, the Fade/ Wipe does not function.