JVC GR-AXM710 manual Video Playback Basic Playback, Rewind or Fast-Forward the tape, Play Back

46EN

Power lamp

Power Switch

VIDEOPLAYBACKBasicPlayback

1 LOAD A CASSETTE

First open the LCD monitor to an angle of over 60 degrees. Slide EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.

System

Select

Switch

EJECT Switch

REW (2) Button

FF (3) Button

PLAY/PAUSE (4/6)

Button

STOP (5) Button

LCD Monitor in Retracted Position

2 SELECTMODE OPERATION SYSTEM AND

Make sure the LCD monitor is fully open. Set the System Select Switch to “VIDEO”, and set the Power Switch to “PLAY”.

3 PLAY BACK

Press PLAY/PAUSE (4/6). The playback picture appears.

4 STOP PLAYBACK

Press STOP (5).

Rewind or Fast-Forward the tape

Press REW (2) to rewind, or FF (3) to fast-forward the tape during Stop mode.

NOTES:

●The camcorder shuts off automatically after about

5 minutes in Stop mode. To turn on again, set the Power Switch to “POWER OFF”, then to “PLAY”.

●When the Power Switch is set to “PLAY” and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power.

●The playback picture can also be viewed in the

viewfinder (with the LCD monitor shut) or on a connected TV (☞ pg. 50, 51). Camcorder operation is the same as described in this section.

●You can also view the playback picture on the LCD monitor with it flipped over and retracted.

●If a blank portion on the tape is played back, the screen may become black. This is not a malfunction.

Battery pack remaining power indicator

Tape counter

Recording mode indicator

			Tape running
	SP
M 1 : 23 : 45			indicator
		4		:Playback
		3		:Fast-Forward/
				Forward Search
		2		:Rewind/Reverse
				Search
		6		:Still Playback

LCD monitor/viewfinder indications