JVC GR-DVL765 20 EN, Time Code, When a blank portion is recorded on a tape, Proper recording

Page 20

20 EN

TAPE RECORDING (cont.)

Time Code

During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback.

If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.

To perform Random Assemble Editing ( pg. 58 – 62), time code is necessary. If during recording a blank portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The Middle of A Tape” below in the following cases;

When shooting again after playing back a recorded tape.

When power shuts off during shooting.

When a tape is removed and re-inserted during shooting.

When shooting using a partially recorded tape.

When shooting on a blank portion located partway through the tape.

When shooting again after shooting a scene then opening/closing the cassette holder cover.

Display

 

 

 

 

Frames are not displayed

 

 

 

 

during recording.

 

 

 

 

 

 

Minutes

 

 

 

 

 

 

Seconds

 

 

 

 

 

 

Frames

 

 

 

 

 

 

(25 frames = 1 second)

1 2 : 3 4 : 2 4

 

 

 

 

 

Recording From The Middle Of A Tape

1.Play back a tape or use Blank Search ( pg. 24) to find the spot at which you want to start recording, then engage the Still Playback mode ( pg. 21).

2. Set the Power Switch to “

” or “

” while pressing down the Lock Button located on the switch,

AUTO

MANUAL

 

then start recording.

 

 

NOTES:

The time code cannot be reset.

During fast-forwarding and rewinding, the time code indication does not move smoothly.

The time code is displayed only when “TIME CODE” is set to “ON”( pg. 49, 50).

When a blank portion is recorded on a tape

Time code

Time code

Time code

00:00:00

05:43:21

00:00:00

Tape

Already recorded scene

Blank

Newly recorded scene

Shooting start pointShooting stop point Shooting start point

Proper recording

Time code

Time code

Time code

00:00:00

05:43:21

05:44:00

Tape

Already recorded scene

New scene

Latest scene

Shooting start point

Shooting start point

Shooting start point

Image 20
Contents GR-DVL765 Blue to N Neutral or Black Brown to L Live or Red Dear CustomerIt is recommended that you Some DO’S and DON’TS on the Safe USE of Equipment Above ALLBefore recording an important scene How To Attach The Lens Cap How To Attach The Core Filter While pressing downGetting Started Power Charging the Battery PackBattery pack Charging time To Detach The Battery PackApproximate recording time Using the Battery PackUsing AC Power Grip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings Set the Power Switch toLoading/Unloading a Cassette Approximate recording time Tape Recording mode12 EN Recording Mode Setting Set the tape recording mode depending on your preferencePicture Quality/Image Size Setting Loading a Memory CardTo Unload a Memory Card Press the MENU/BRIGHT wheel in. The Menu Screen appearsTape Recording To Adjust The Brightness Of The Display 16 ENBasic Recording To Stop RecordingOperation Mode Power Switch PositionVIDEO/MEMORY Switch Position Journalistic ShootingSlide the Power Zoom Lever towards T 18 ENZoom Zoom OutTo brighten the scene when natural lighting is too dim Set Light OFF/AUTO/ON as required OFF Turns off the lightWhen a blank portion is recorded on a tape 20 ENTime Code Proper recordingTo Control The Speaker Volume Normal PlaybackCamcorder 22 ENConnections If using a VCR . . . go to step If not . . . go to step Date/Time Set DATE/TIME to AUTO, on or OFF Menu Screen  pgTo cancel Blank Search midway 24 ENBlank Search PressMemory Card 26 EN Basic Shooting SnapshotTo Remove The Shutter Sound When unwanted still images are storedTo Protect Valuable Files available only for SD Memory Card 28 EN Auto PlaybackType of file played back last time is played If you are viewing an Image fileRemoving On-Screen Display Index PlaybackViewing File Information 30 EN Protecting FilesTo Remove Protection Stored file is displayedMENU/BRIGHT Wheel Power Switch Lock Button Deleting FilesSelect Button Display Menu Screen Delete Screen32 EN Dubbing Still Images Recorded On a Tape To a Memory CardLock Button Display Menu Screen Play/Pause Button 4/6 Stop Button MENU/BRIGHT WheelTo cancel E-Mail Clip Recording To Make Video Clips from REAL-TIME Camera ImageTo Make Video Clips from Recorded Video Footage To view video clips stored on a memory cardTo Reset The Setting 34 ENTo Print ALL Still Images ONE Print for Each Dpof ScreenTo Reset The No. Of Prints To Print by Selecting Still Images NO. of PrintsFast-Forward 3 Button Rewind Button Select Button36 EN Making a New FolderInitialising a Memory Card Folder and File namesAdvanced Features To Deactivate The Selected Mode 38 ENNight-Scope To Deactivate Night-ScopeShutter SnowSpotlight TwilightPower Switch Recording Start/Stop Button 40 ENFade/Wipe Effects To Deactivate The Selected EffectFader And Wipe Menu Snapshot Mode Selection 42 ENSnapshot For Tape Recording Snapshot RecordingWhile focusing on a nearer subject To obtain correct focusFocus detection zone SubjectIris Lock 44 ENExposure Control White Balance Adjustment Manual White Balance OperationCloud Halogen46 EN For Recording MenuWIPE/FADER Program AEMenu Screen Explanations 48 EN CAM Cancel Reset ExecuteSystem Display Demo OFFFor Playback Menu Following procedure applies to all except Synchro Comp  pg50 EN Display Sound ModePlayback Sound VCR 52 ENDubbing To a VCR Core filter DV cable optional To DVInstalling The Batteries 54 ENWith the camcorder’s Power Switch Switch set to the camera Set to Play56 EN To allow frame-by-frame search during tape playbackTo allow you to add creative effects to the playback image Select MenuRight Button Stop Normal playback To move image, press Press TVCR Recording deck 58 ENSET REMOTE/VCR Code Connect the editing cable to the Remote Pause connector Connect the editing cable to the R.A.EDIT ConnectorMake Connections Also refer to pg60 EN Select ScenesRandom Assemble Editing Menu appears Editing MenuAutomatic Editing to VCR Adjustment of VCR/CAMCORDER Timing 62 ENFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg Input connectorAudio Dubbing To hear the dubbed sound during playback64 EN Insert EditingUsing USB cable Using DV cableTo USB Connector To USB66 EN Benefits Of Lithium-Ion Batteries About BatteriesCold, charging may be incomplete 68 EN SET DATE/TIME! appears Date/time is not setOr OFF To Video There is no pictureFind a white subject and compose 10X optical zoom is selected Set Zoom to 40X or 500XTo Memory Video  pg70 EN Or set the Power Switch to OFF IndicatorsIs hot Let the unit cool downSet the VIDEO/MEMORY Turn the speaker volume down72 EN Indication remains even though You repeat the above two or threeTimes, please consult your nearest JVC dealerAfter Use Cleaning The Camcorder74 EN To avoid hazards To prevent damage and prolong service lifeUse only the following batteries AAA R03 size x 76 EN Dirty heads can cause the following problems To protect the unit, do notAbout moisture condensation Serious malfunctioning78 EN USB EditIndex Controls, Connectors And Indicators 80 ENOPEN/EJECT Switch  pg Power SwitchVIDEO/MEMORY Switch Video Light Switch  pg1024 82 ENIndex Indications Appears when the Power Switch is set to # @Volume 84 ENLCD Monitor/Viewfinder Indications During Tape Playback 116 21Indications  pg86 EN Backlight Compensation  pg , 9Channels Left/Right Darken The LCD MonitorSee previous page as well Unload a TapeWhite Balance