36 EN
Folder and File names
Each time shooting takes place, a file name is made using a number which is larger by one than the largest number of the file names which are in use. Even if you delete an image file with a number in the middle of range, the number will not be used for a new shot; a gap will remain in the numerical sequence. If the file name reaches DVC09999, a new folder (such as “101JVCGR”) will be made and the file name will start again from DVC00001.
MENU/BRIGHT Wheel
VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)
SELECT Button
| Lock Button | MANUAL |
| AUTO | |
|
| OFF |
|
| PLAY |
|
| Power Switch |
Display |
| |
FORMAT | Menu Screen | |
|
| |
ERASE | AL L |
|
EX I ST I NG | DATA? |
|
EXECUTE
RETURN
ADVANCED FEATURES (cont.)
Making A New Folder
New still pictures you are going to take can be separated from previously shot pictures by resetting the file name to DVC00001; these new pictures will be stored in a new folder.
1 Set the VIDEO/MEMORY Switch to “MEMORY”, then set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
• A stored file is displayed.
2 Make sure an IMAGE file is displayed
( pg. 28); if not, press SELECT to access the MEMORY SELECT Screen. Rotate the MENU/ BRIGHT wheel to select “IMAGE” and press it.
3 Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate the MENU/BRIGHT wheel to select “NO. RESET”, then press it. The NO. RESET Screen appears.
4 Rotate the MENU/BRIGHT wheel to select “EXECUTE”, then press it. The new folder (such as “101JVCGR”) will be made and the file name of the next shot starts from DVC00001.
Initialising A Memory Card
You can initialise a memory card anytime.
After initialising, all files and data stored on the memory card, including those which have been protected, are cleared.
1 Perform step 1 of “Making A New Folder” above.
2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate the MENU/BRIGHT wheel to select “FORMAT” and press it. The FORMAT Screen appears.
3 Rotate the MENU/BRIGHT wheel to select “EXECUTE” and press it. The memory card is initialised. When initialisation is finished, “NO IMAGES STORED” or “NO
•To cancel initialisation, rotate the MENU/BRIGHT wheel to select “RETURN” and press it.
CAUTION
Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialisation. If the memory card becomes corrupted initialise it.