EN 49
SYSTEM
DISPLAY
DSC
DEMO | OFF | Automatic demonstration will not take place. |
| ||
MODE |
|
|
|
| |
ON | Demonstrates certain functions such as Programme AE with special effects, | ||||
| |||||
|
| etc., and can be used to confirm how these functions operate. | |||
|
| Demonstration starts in the following cases: |
| ||
|
| • When the Menu Screen is closed after “DEMO MODE” is turned “ON”. | |||
|
| • With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes | |||
|
| AUTO | MANUAL | ” . | |
|
| after the Power Switch is set to “ | ” or “ | ||
Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.
NOTES:
●If a tape is in the camcorder, the demonstration cannot be turned on.
●“DEMO MODE” remains “ON” even if the camcorder power is turned off.
●If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.
SIDE LED | ON | The Side LED indicator ( p. 80, 81) lights on the camcorder when the Power | |||||
|
|
| Switch is set to “ | ” or “ | ”. |
|
|
|
| OFF | AUTO | MANUAL |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| ||
CAM | CANCEL | Does not reset all settings to the |
|
| |||
RESET |
|
|
|
|
|
|
|
| EXECUTE | Resets all settings to the |
|
| |||
|
|
|
| ||||
ON | LCD | Keeps the camcorder’s display (except the date, time and time code) from | |||||
SCREEN |
| appearing on the connected TV screen. |
|
| |||
|
|
|
| ||||
|
| LCD/TV | Makes the camcorder’s display appear on screen when the camcorder is | ||||
|
|
| connected to a TV. |
|
|
|
|
DATE/ | OFF | The date/time does not appear. |
|
|
| ||
TIME |
|
|
|
|
|
|
|
| AUTO | Displays the date/time for approx. 5 seconds in the following cases: | |||||
|
| ||||||
|
|
| • When the Power Switch is set from “OFF” to “ | ” or “ | ”. | ||
|
|
|
|
| AUTO | MANUAL |
|
•When tape playback starts. The camcorder displays the date/time when scenes are recorded.
•When the date is changed during tape playback.
| ON | The date/time is always displayed. | ||||
|
|
|
|
|
| |
TIME | OFF | Time code is not displayed. | ||||
CODE |
|
|
|
|
| |
ON | Time code is displayed on the camcorder and on the connected TV. Frame | |||||
| ||||||
|
|
|
|
| numbers are not displayed during recording. | |
|
|
|
|
|
| |
CLOCK ADJ. | Allows you to set the current date and time ( pg. 11). | |||||
QUALITY |
|
|
|
| Refer to “Picture Quality/Image Size Setting” ( pg. 14). | |
|
|
|
|
|
| |
IMAGE SIZE |
| |||||
REC |
|
|
|
| When Snapshot recording is performed with the VIDEO/MEMORY Switch set | |
SELECT |
|
|
|
| to “VIDEO”, still images are recorded only onto the tape. | |
|
|
|
|
|
| |
|
|
|
| / | When Snapshot recording is performed with the VIDEO/MEMORY Switch set | |
|
|
| ||||
|
|
|
|
| to “VIDEO”, still images are recorded not only onto the tape but also on the | |
|
|
|
|
| memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in | |
|
|
|
|
| ||
|
|
|
|
| the CAMERA Menu is also applicable to memory card recording. | |
|
|
|
|
|
| |
: Factory-preset
NOTES:
|
|
|
| MANUAL |
|
|
● “ | SYSTEM” and “ | DISPLAY” functions which are set when the Power Switch is set to “ | ” are also applied | |||
|
|
|
| |||
when the Power Switch is set to “PLAY” ( pg. 50). “CLOCK ADJ.” only appears when the Power Switch is set to | ||||||
“ |
| ”. |
|
|
|
|
MANUAL |
|
|
|
|
| |
● Settings made in the “ | DISPLAY” Menu remain effective even when the Power Switch is set to “ | ”. However, | ||||
|
|
|
|
| AUTO |
|
|
|
| MANUAL | ”. |
|
|
the menu settings can be changed only when the Power Switch is set to “ |
|
| ||||
●The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control (provided) ( pg. 23, 52, 59).