JVC GR-DVL765 specifications 48 EN

48 EN				USING MENUS FOR DETAILED ADJUSTMENT (cont.)
Menu Screen Explanations (cont.)
		TELE	OFF	Usually the distance to a subject where the lens is in focus depends on the
		MACRO		zoom magnification. Unless there is a distance more than 1m to the subject,
				the lens is out of focus at the maximum telephoto setting. When set to “ON”,
			ON
				you can shoot a subject as large as possible at a distance of approx. 60 cm.
				• Depending on the zoom position, the lens may go out of focus.
		WIDE	OFF	Records with no change in the screen ratio. For playback on a TV with a
		MODE		normal screen ratio.
			CINEMA	Inserts black bands at the top and bottom of the screen. During playback on
				wide-screen TVs, the black bands at the top and bottom of the screen are cut
				and the screen ratio becomes 16:9.	appears. When using this mode, refer
				to your wide-screen TV’s instruction manual. During playback/recording on 4:3
				TVs/LCD monitor/viewfinder, black bands are inserted at the top and bottom of
	MANUAL			the screen and the image appears like a letterboxed 16:9 movie.
				• The “CINEMA” mode is effective only when the VIDEO/MEMORY Switch is
				set to “VIDEO”.
			SQUEEZE	For playback on TVs with an aspect ratio of 16:9. Naturally expands the image
				to fit the screen without distortion.	appears. When using this mode, refer to
				your wide-screen TV’s instruction manual. During playback/recording on 4:3
				TVs/LCD monitor/viewfinder, the image is elongated vertically.

•The “SQUEEZE” mode is effective only when the VIDEO/MEMORY Switch is set to “VIDEO”.

		S.WIDE	“	” appears. The zoom range is extended beyond the maximum optical
			zoom wide angle range. This mode’s wide angle setting is equivalent to using
			a 0.9X wide conversion lens. Zooming is possible from 0.9X to 10X. This mode
			is suitable for shooting in a small room.
			• “S.WIDE” mode is effective only when the VIDEO/MEMORY Switch is set to
			“VIDEO”.
	WIND	OFF	Disengages the function which cuts down on noise created by wind.
	CUT	ON	Helps cut down on noise created by wind. “ ” appears. The quality of the
			sound will change. This is normal.
	BEEP	OFF	Even though not heard while shooting, shutter sound is recorded on the tape.
SYSTEM		BEEP	The beep sounds when the power is turned on or off, and at the beginning and
			end of recording. Also to activate the shutter sound effect ( pg. 26, 42).
		MELODY	Instead of a beep, a melody sounds when any operation is performed. It also
			activates the shutter sound effect ( pg. 26, 42).
	TALLY	OFF	The tally lamp remains off at all times.
		ON	The tally lamp comes on to signal the start of recording.

: Factory-preset

NOTES:

● The “		MANUAL” settings are effective only when the Power Switch is set to “		”.
		MANUAL
● “	SYSTEM” functions which are set when the Power Switch is set to “MANUAL		” are also applied when the Power
Switch is set to “PLAY” ( pg. 50).