JVC GR-DVL765 42 EN, Snapshot For Tape Recording, Snapshot Mode Selection, Snapshot Recording

42 EN FOR RECORDING (cont.)

SNAPSHOT Button

Power Switch

Lock Button

VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)

Display

Menu Screen

SNAP MODE – FUL L

P I N–UP

FRAME

FULL

Snapshot mode with no frame

PIN-UP

Pin-Up mode

FRAME

Snapshot mode with frame

There is the sound effect of a shutter closing.

Snapshot (For Tape Recording)

This feature lets you record still images that look like photographs onto a tape.

SNAPSHOT MODE SELECTION

1 Set the VIDEO/MEMORY Switch to “VIDEO”,

then set the Power Switch to “	” while pressing
MANUAL

down the Lock Button located on the switch.

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.

3 Rotate the MENU/BRIGHT wheel to select “ CAMERA”. Press it and the CAMERA Menu appears.

4 Rotate the MENU/BRIGHT wheel to select “SNAP MODE”, then press it.

5 Rotate the MENU/BRIGHT wheel to select the desired Snapshot mode, then press it.

Rotate the MENU/BRIGHT wheel to select

“ RETURN” and press it twice. The Menu Screen closes.

SNAPSHOT RECORDING

1 Press SNAPSHOT. “PHOTO” appears while the snapshot is being taken.

If you press during Record-Standby . . .

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

..... “PHOTO” appears and a still image will be recorded

	for approx. 6 seconds, then the normal recording
	resumes.		” or
• Regardless of the Power Switch position (“
“		AUTO
		”), Snapshot recording takes place using the
MANUAL

selected Snapshot mode.

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

NOTES:

●To remove the shutter sound,
“BEEP” on pg. 46, 48.

●If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●If Programme AE with special effects (
pg. 38) is engaged, certain modes of Programme AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●If SNAPSHOT is pressed when “DIS” is set to “ON” (
pg. 47), the Stabiliser will be disabled.

●The Motor Drive mode is disabled when “REC

SELECT” is set to “ / ” in the Menu Screen

(
pg. 49).

● If “REC SELECT” is set to “ / ” in the DSC Menu Screen, still images are recorded on the memory card as well (640 X 480 pixels).

●During tape playback as well, all snapshot modes are

available when “ COPY” is set to “OFF” in the

Menu Screen (
pg. 50). However, the shutter sound is not heard.

●During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no effect in the recorded image.

●When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.