JVC GR-DX35 manual Press Blank Search, To cancel Blank Search midway, Tape Playback

Page 14

Speaker

8

& *

9

7

4

NOTES:

●If Stop mode continues for 5 minutes when power is

supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch 8

to “OFF”, then to “ ”.

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV ( pg. 15).

●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.

●LCD monitor/viewfinder indications:

When power is supplied from a battery: the “ ” battery pack remaining power indicator is displayed.

When power is supplied from an AC outlet: “ ” does not appear.

●When a cable is connected to the S/AV connector #, the sound is not heard from the speaker.

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.

●When 4/67 is pressed to engage still playback, the image may not pause immediately while the camcorder stabilises the still image.

Blank Search

Helps you find where you should start recording in the middle of a tape to avoid time code interruption

( pg. 13).

1 Load a tape ( pg. 9).

2 Set the Power Switch 8 to “ ” while pressing down the Lock Button 0 located on the switch.

3 Press BLANK SEARCH (.

•“BLANK SEARCH” r appears and the camcorder automatically starts reverse or forward shuttle search, then stops at the spot which is about

3 seconds of tape before the beginning of the detected blank portion.

To cancel Blank Search midway . . .

..... press 54.

NOTES:

●In step 3, if the current position is at a blank portion the camcorder searches in the reverse direction, and if the current position is at a recorded portion the camcorder searches in the forward direction.

●Blank Search does not work if “HEAD CLEANING REQUIRED. USE CLEANING CASSETTE” has appeared with the tape.

●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.

●A blank portion which is shorter than 5 seconds of tape may not be detected.

●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.

(

0

8

EN

14 TAPE PLAYBACK

Page 13 Page 15
Image 14
Page 13 Page 15
Contents GR-DX35 Contents Safety Precautions Before recording an important scene Editing Extension Cable USB Cable Core Filter Power CordTo the camcorder Attachment Tab AAA R03 Battery x Core Filter xSub Menu Release the stoppers on both ends of the Core FilterStopper Using the Battery Pack PowerCharging the Battery Pack Using AC PowerLithium-ion is vulnerable in colder temperatures Grip AdjustmentViewfinder Adjustment About BatteriesLoading/Unloading a Cassette Approximate recording time Tape Recording modeTripod Mounting Press + or 3 to select Camera and press SELECT/SET Date/Time SettingsRecording Mode Setting Viewfinder fully To Adjust The Brightness Of The DisplayBasic Recording Tape RecordingJournalistic Shooting Operation ModePower-Linked Operation Self-RecordingTime Code Available only with the remote control  pgTo Control The Speaker Volume Normal PlaybackPress Blank Search To cancel Blank Search midwayBlank Search Tape PlaybackTo TV or VCR If using a VCR . . . go to step If not . . . go to stepConnections Night-Scope Programme AE With Special EffectsFade/Wipe Effects Auto Focus Snapshot Mode SelectionSnapshot Snapshot RecordingPress + or 3 to select EXPOSURE, then press SELECT/SET Manual FocusExposure Control To Return To Automatic Exposure ControlManual White Balance Operation White Balance AdjustmentIris Lock Exposure WIPE/FADERProgram AE BalanceManual System Camera DisplayFor Playback Menu VideoDisplay Video DisplayPlayback Sound DATE/TIME , Time CodeTo Use This Camcorder As a Recorder Dubbing To Or From a VCRTo Use This Camcorder As a Player DubbingTo DV Core filter DV cable optional To DV IN/OUT Playback Special Effects Using the Remote Control UnitSlow-Motion Playback Playback ZoomInsert Editing Set 12bit Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing To hear the dubbed sound during playbackMake Connections Random Assemble Editing R.A.EditSET REMOTE/VCR Code Editing Extension cable provided Select ScenesTo S/AV # To Pause in aFor More Accurate Editing Adjustment of VCR/CAMCORDER TimingAutomatic Editing to VCR Diagnosing VCR/CAMCORDER TimingUsing USB cable Using USB cableUsing DV cable Connection To a Personal ComputerSnapshot mode cannot be used No power is suppliedFocus does not adjust automatically Image taken using Snapshot is too darkDate/time does not appear Image looks like the shutter speed is too SlowWhite Balance cannot be activated Time code does not appearCharger indicator on the camcorder does Not light An error indication E01, E02 or E06 appearsAn error indication E03 or E04 appears During recording, sound cannot be heardCassettes General Battery PrecautionsBattery Packs LCD MonitorMain Unit Built-in Clock’s Rechargeable Lithium BatteryHow to handle a CD-ROM After Use For Your MaintenanceCleaning The Camcorder About moisture condensationIndex Controls, Connectors And IndicatorsRemote Control LCD monitor Speaker ViewfinderBattery Release Button Power Switch# S-Video/Audio/Video Input/Output Connector  pgDuring Tape Playback LCD Monitor/Viewfinder IndicationsDuring Tape Recording I t / SOUND1Appears when Gain UP is set to Auto Appears when the Power Switch Is set toAppears when Night-Scope is Appears when the white balance isE03 or E04 Unit in Safeguard Mode Eject and Reinsert Tape HighGeneral ConnectorsCamcorder Digital Video CameraTerms White Balance Self-RecordingUnload a Tape ZoomingAH 0303-MK-ID-SN
Top Page Image Contents