Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as the source player. You can select up to 8 “cuts” for automatic editing, in any order you like. R.A.Edit is more easily performed when the MBR
Before operation, make sure the batteries are installed in the remote control ( pg. 5).
SET REMOTE/VCR CODE
1 Turn off the power to the VCR and point the remote towards the VCR’s infrared sensor. Then, referring to the VCR CODE LIST, press and hold MBR SET d, and enter the brand code.
The code is automatically set once you release MBR SET d, and the VCR’s power comes on.
2 Make sure the VCR’s power is on. Then, while holding SHIFT W, press the button on the remote for the desired function. The functions the remote can control are PLAY, STOP, PAUSE, FF, REW and VCR REC STBY (you do not need to press SHIFT W for this one).
You are now ready to try Random Assemble Editing.
VCR
(Recording deck)
Q |
| |
W | d | |
3 | 4 | |
1 | 2 | |
6 | ||
5 | ||
7 | ||
0 | ||
8 | 9 |
VCR CODE LIST
VCR BRAND | BRAND | VCR BRAND | BRAND | VCR BRAND | BRAND | |||
NAME | CODE | NAME | CODE | NAME | CODE | |||
AKAI | 6 | 2 | MITSUBISHI | 6 | 7 | SAMSUNG | 9 | 4 |
| 6 | 4 |
| 6 | 8 | SANYO | 3 | 6 |
| 7 | 7 | NEC | 3 | 7 |
| 3 | 5 |
BLAUPUNKT | 1 | 3 |
| |||||
| 3 | 8 | SELECO, | 9 | 1 | |||
DAEWOO | 1 | 8 | PANASONIC | 1 | 3 | REX | 9 | 6 |
FERGUSON | 9 | 7 |
| 1 | 7 | SHARP | 1 | 5 |
| 9 | 8 |
| 1 | 1 |
| 1 | 0 |
| 3 | 2 |
| 9 | 4 | SONY | 6 | 5 |
GRUNDIG | 1 | 4 |
| 1 | 8 |
| 6 | 0 |
| 3 | 4 | PHILIPS | 1 | 9 |
| 3 | 9 |
HITACHI | 6 | 6 |
| 9 | 5 |
| 3 | 1 |
| 1 | 1 |
| |||||
| 6 | 3 |
| THOMSON, | 9 | 1 | ||
|
| 9 | 4 | |||||
JVC A | 9 | 1 |
| 9 | 1 | TELEFUNKEN, | 9 | 6 |
B | 9 | 6 |
| 9 | 6 | SABA, | 9 | 7 |
C | 9 | 3 |
| 1 | 2 | NORDMENDE | 3 | 2 |
LG/ | 1 | 1 |
| 3 | 3 | TOSHIBA | 6 | 9 |
GOLDSTAR |
|
|
| 7 | 2 |
| 6 | 1 |
EN
IMPORTANT
Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.
NOTES:
●If the VCR’s power does not come on in step 1, try another code from the VCR CODE LIST.
●Some brands of VCR do not come on automatically. In this case, turn the power on manually and try step 2.
●If the remote control is not able to control the VCR, use the controls on the VCR.
●When the remote control’s batteries run out, the VCR brand you have set will be erased.
In that case, replace the old battery with a new one to reset the VCR brand.
MAKE CONNECTIONS
Also refer to pg. 15 and 31.
1
A JVC VCR equipped with a remote pause connector . . .
.... connect the editing extension cable to the Remote PAUSE connector.
A JVC VCR not equipped with a remote pause connector but equipped with an R.A.EDIT connector . . .
.... connect the editing extension cable to the
R.A.EDIT connector.
A VCR other than above . . .
.... connect the editing extension cable to the remote
control’s PAUSE IN connector a.
2 Insert a recorded tape into the camcorder. Set the
Power Switch 8 to “ 
” while pressing down the Lock Button 0 located on the switch.
3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).
NOTES:
Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the Menu Screen ( pg. 23, 25).
Or, press DISPLAY Q on the remote control to turn on/off the date indication.
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu Screen ( pg. 24, 25).
•Indications other than date/time and time code
.... set “ON SCREEN” to “LCD”, “LCD/TV” or “OFF” in the Menu Screen ( pg. 23, 25).