JVC GR-DX35 Connections, If using a VCR . . . go to step If not . . . go to step, To TV or VCR

Page 15

Connections

1 Make sure all units are turned off.

2 Connect the camcorder to a TV or VCR as shown in the illustration.

If using a VCR . . . go to step 3.

If not . . . go to step 4.

3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen ( pg. 23, 25).

Or, press DISPLAY Q on the remote control to turn on/off the date indication.

To S/AV #

S-Video/Audio/ Video/Editing cable (provided)

To S-Video IN

Not connected

Connector cover*

Yellow to VIDEO IN***

Red to AUDIO R IN**

White to AUDIO L IN**

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen ( pg. 24, 25).

• Indications other than date/time and time code

..... set “ON SCREEN” to “LCD”, “LCD/TV” or “OFF” in

the Menu Screen ( pg. 23, 25).

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 7).

●To monitor the picture and sound from the camcorder

without inserting a tape, set the camcorder’s Power Switch 8 to “ ” or “ ”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

●If no image is displayed or no sound is heard from the TV,

set “S/AV INPUT” to “OFF” in the Menu Screen ( pg. 24).

●While the S-Video/Audio/Video/Editing cable is con- nected to the S/AV connector #, sound cannot be heard from the speaker.

To TV or VCR

TV

VCR

*When connecting the cables, open this cover.

**The audio connection is not required for watching still images only.

***Connect when the S-Video connection is not used.

EN

TAPE PLAYBACK 15

Image 15

Contents GR-DX35 Contents Safety Precautions Before recording an important scene Core Filter x Power CordTo the camcorder Attachment Tab AAA R03 Battery x Editing Extension Cable USB Cable Core FilterRelease the stoppers on both ends of the Core Filter StopperSub Menu Using AC Power PowerCharging the Battery Pack Using the Battery PackAbout Batteries Grip AdjustmentViewfinder Adjustment Lithium-ion is vulnerable in colder temperaturesApproximate recording time Tape Recording mode Tripod MountingLoading/Unloading a Cassette Date/Time Settings Recording Mode SettingPress + or 3 to select Camera and press SELECT/SET Tape Recording To Adjust The Brightness Of The DisplayBasic Recording Viewfinder fullySelf-Recording Operation ModePower-Linked Operation Journalistic ShootingNormal Playback Available only with the remote control pgTo Control The Speaker Volume Time CodeTape Playback To cancel Blank Search midwayBlank Search Press Blank SearchIf using a VCR . . . go to step If not . . . go to step ConnectionsTo TV or VCR Programme AE With Special Effects Night-ScopeFade/Wipe Effects Snapshot Recording Snapshot Mode SelectionSnapshot Auto FocusTo Return To Automatic Exposure Control Manual FocusExposure Control Press + or 3 to select EXPOSURE, then press SELECT/SETWhite Balance Adjustment Iris LockManual White Balance Operation Balance WIPE/FADERProgram AE ExposureManual Camera Display SystemVideo For Playback MenuDATE/TIME , Time Code Video DisplayPlayback Sound DisplayDubbing Dubbing To Or From a VCRTo Use This Camcorder As a Player To Use This Camcorder As a RecorderTo DV Core filter DV cable optional To DV IN/OUT Playback Zoom Using the Remote Control UnitSlow-Motion Playback Playback Special EffectsTo hear the dubbed sound during playback Set 12bit Mode to Sound 2 or MIX Menu Screen pgAudio Dubbing Insert EditingRandom Assemble Editing R.A.Edit SET REMOTE/VCR CodeMake Connections To Pause in a Select ScenesTo S/AV # Editing Extension cable providedDiagnosing VCR/CAMCORDER Timing Adjustment of VCR/CAMCORDER TimingAutomatic Editing to VCR For More Accurate EditingConnection To a Personal Computer Using USB cableUsing DV cable Using USB cableImage taken using Snapshot is too dark No power is suppliedFocus does not adjust automatically Snapshot mode cannot be usedTime code does not appear Image looks like the shutter speed is too SlowWhite Balance cannot be activated Date/time does not appearDuring recording, sound cannot be heard An error indication E01, E02 or E06 appearsAn error indication E03 or E04 appears Charger indicator on the camcorder does Not lightLCD Monitor General Battery PrecautionsBattery Packs CassettesBuilt-in Clock’s Rechargeable Lithium Battery How to handle a CD-ROMMain Unit About moisture condensation For Your MaintenanceCleaning The Camcorder After UseLCD monitor Speaker Viewfinder Controls, Connectors And IndicatorsRemote Control Index pg Power Switch# S-Video/Audio/Video Input/Output Connector Battery Release ButtonI t / SOUND1 LCD Monitor/Viewfinder IndicationsDuring Tape Recording During Tape PlaybackAppears when the white balance is Appears when the Power Switch Is set toAppears when Night-Scope is Appears when Gain UP is set to AutoHigh E03 or E04 Unit in Safeguard Mode Eject and Reinsert TapeDigital Video Camera ConnectorsCamcorder GeneralTerms Zooming Self-RecordingUnload a Tape White BalanceAH 0303-MK-ID-SN