JVC GR-DX35 manual High, E03 or E04 Unit in Safeguard Mode Eject and Reinsert Tape

Page 44

WARNING INDICATIONS

(high)

(exhausted)

Displays the battery remaining power level. As the battery power comes close to nil, the battery indicator

blinks (battery power warning). When the battery power is exhausted, power turns off automatically.

Appears when no tape is loaded.( pg. 9)

CHECK TAPE’S ERASE PROTECTION TAB

Appears when the erase protection tab is set to “SAVE” while the Power Switch 8 is set to “ ” or “ ”.

( pg. 9)

HEAD CLEANING REQUIRED USE CLEANING CASSETTE

Appears if dirt is detected on the heads during recording or playback. Use an optional cleaning

cassette.

( pg. 38)

CONDENSATION, OPERATION PAUSED PLEASE WAIT

Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.

TAPE!

Appears if a tape is not loaded when the Recording Start/Stop Button 7 or SNAPSHOT Button 5 is pressed while the Power Switch 8 is set to “ ” or “ ”.

TAPE END

Appears when the tape ends during recording or playback.

SET DATE/TIME!

 

• Appears when the date/time is not set.

( pg. 10)

•Appears when the built-in clock (lithium) battery is discharged and the previously set date/time is erased.

( pg. 38)

LENS CAP

Appears for 5 seconds after power is turned on if the lens cap is attached.

A. DUB ERROR!

Appears if Audio Dubbing is attempted on a blank

portion of a tape.

( pg. 29)

A. DUB ERROR!

<CANNOT DUB ON A LP RECORDED TAPE> <CANNOT DUB ON A 16BIT RECORDING> <CHECK TAPE’S ERASE PROTECTION TAB>

•Appears if Audio Dubbing is attempted on a tape recorded in the LP mode.

•Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio.

•Appears if A. DUB (e) h on the remote control is pressed when the erase protection tab is set to

“SAVE”.( pg. 29)

INSERT ERROR!

Appears if Insert Editing is attempted on a blank

portion of a tape.

( pg. 29)

INSERT ERROR!

<CANNOT EDIT ON A LP RECORDED TAPE> <CHECK TAPE’S ERASE PROTECTION TAB>

•Appears if Insert Editing is attempted on a tape recorded in the LP mode.

•Appears if INSERT (w) g on the remote control is

pressed when the erase protection tab is set to

“SAVE”.

( pg. 29)

E01, E02 or E06 UNIT IN SAFEGUARD MODE REMOVE AND REATTACH BATTERY

The error indications (E01, E02 or E06) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

E03 or E04 UNIT IN SAFEGUARD MODE EJECT AND REINSERT TAPE

The error indications (E03 or E04) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Eject the cassette once and re-insert it, then check if the indication clears. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

EN

44 INDEX

Page 43 Page 45
Image 44
Page 43 Page 45
Contents GR-DX35 Contents Safety Precautions Before recording an important scene Power Cord To the camcorder Attachment Tab AAA R03 Battery xEditing Extension Cable USB Cable Core Filter Core Filter xSub Menu Release the stoppers on both ends of the Core FilterStopper Power Charging the Battery PackUsing the Battery Pack Using AC PowerGrip Adjustment Viewfinder AdjustmentLithium-ion is vulnerable in colder temperatures About BatteriesLoading/Unloading a Cassette Approximate recording time Tape Recording modeTripod Mounting Press + or 3 to select Camera and press SELECT/SET Date/Time SettingsRecording Mode Setting To Adjust The Brightness Of The Display Basic RecordingViewfinder fully Tape RecordingOperation Mode Power-Linked OperationJournalistic Shooting Self-RecordingAvailable only with the remote control  pg To Control The Speaker VolumeTime Code Normal PlaybackTo cancel Blank Search midway Blank SearchPress Blank Search Tape PlaybackTo TV or VCR If using a VCR . . . go to step If not . . . go to stepConnections Night-Scope Programme AE With Special EffectsFade/Wipe Effects Snapshot Mode Selection SnapshotAuto Focus Snapshot RecordingManual Focus Exposure ControlPress + or 3 to select EXPOSURE, then press SELECT/SET To Return To Automatic Exposure ControlManual White Balance Operation White Balance AdjustmentIris Lock WIPE/FADER Program AEExposure BalanceManual System Camera DisplayFor Playback Menu VideoVideo Display Playback SoundDisplay DATE/TIME , Time CodeDubbing To Or From a VCR To Use This Camcorder As a PlayerTo Use This Camcorder As a Recorder DubbingTo DV Core filter DV cable optional To DV IN/OUT Using the Remote Control Unit Slow-Motion PlaybackPlayback Special Effects Playback ZoomSet 12bit Mode to Sound 2 or MIX Menu Screen  pg Audio DubbingInsert Editing To hear the dubbed sound during playbackMake Connections Random Assemble Editing R.A.EditSET REMOTE/VCR Code Select Scenes To S/AV #Editing Extension cable provided To Pause in aAdjustment of VCR/CAMCORDER Timing Automatic Editing to VCRFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingUsing USB cable Using DV cableUsing USB cable Connection To a Personal ComputerNo power is supplied Focus does not adjust automaticallySnapshot mode cannot be used Image taken using Snapshot is too darkImage looks like the shutter speed is too Slow White Balance cannot be activatedDate/time does not appear Time code does not appearAn error indication E01, E02 or E06 appears An error indication E03 or E04 appearsCharger indicator on the camcorder does Not light During recording, sound cannot be heardGeneral Battery Precautions Battery PacksCassettes LCD MonitorMain Unit Built-in Clock’s Rechargeable Lithium BatteryHow to handle a CD-ROM For Your Maintenance Cleaning The CamcorderAfter Use About moisture condensationControls, Connectors And Indicators Remote ControlIndex LCD monitor Speaker Viewfinder Power Switch # S-Video/Audio/Video Input/Output Connector Battery Release Button  pgLCD Monitor/Viewfinder Indications During Tape RecordingDuring Tape Playback I t / SOUND1Appears when the Power Switch Is set to Appears when Night-Scope isAppears when Gain UP is set to Auto Appears when the white balance isE03 or E04 Unit in Safeguard Mode Eject and Reinsert Tape HighConnectors CamcorderGeneral Digital Video CameraTerms Self-Recording Unload a TapeWhite Balance ZoomingAH 0303-MK-ID-SN
Top Page Image Contents