56 EN | FEATURES FOR RECORDING (cont.) |
Backlight Compensation
Backlight compensation brightens the subject quickly.
Press BACKLIGHT. The 
indicator is displayed and the subject is brightened. If pressed again, 
disappears and the brightness returns to the previous level.
●Using BACKLIGHT Button may cause the light around the subject to become too bright and the subject to become white.
●Backlight compensations is also available when the Power Switch is set to “A”.
White Balance Adjustment
The white balance that refers to the correctness of color reproduction under various lighting. If the white balance is correct, all other colors will be accurately reproduced.
The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional color/tint reproduction.
— | AUTO | White balance is adjusted | |||||
|
|
|
|
|
|
| automatically. |
|
|
|
|
|
| MWB | Adjust the white balance |
|
|
|
|
|
|
| manually when shooting |
|
|
|
|
|
|
| under various types of |
|
|
|
|
|
|
| lighting. ( “Manual White |
|
|
|
|
|
|
| Balance Adjustment”) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| FINE | Outdoors on a sunny day. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| CLOUD | Outdoors on a cloudy day. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| HALOGEN | A video light or similar type |
|
|
|
|
|
|
| of lighting is used. |
|
|
|
|
|
|
|
|
( 
:
●For the setting, refer to “Changing The Menu Settings” ( pg. 38).
●The selected mode indicator except “AUTO” appears.
To return to automatic white balance…
Set “u W.BALANCE” to “AUTO”. ( pg. 38) Or, set the Power Switch to “A”.
NOTE:
White balance cannot be used when
“r PROGRAM AE” is set to “SEPIA” or “MONOTONE”. ( pg. 41)
Manual White Balance Adjustment
Adjust the white balance manually when shooting under various types of lighting.
White paper
MENU Button
+, – Button
| Power |
SET/SELECT | Switch |
Button |
|
1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.
2Open the LCD monitor fully, or pull out the viewfinder fully.
3Set “u W.BALANCE” to “MWB”. ( pg. 38, 42) ● The 
indication blinks slowly.
4Slide down the lens cover.
5Hold a sheet of plain white paper in front of the subject. Adjust zoom or position yourself so that the white paper fills the screen.
6Press SET/SELECT until 
begins blinking rapidly.
When the setting is completed, 
resumes normal blinking.
7Press SET/SELECT twice. The Menu Screen closes
and the Manual White Balance indicator 
is displayed.
NOTES:
●In step 5, it may be difficult to focus on the white paper. In such a case, adjust focus manually.
( pg. 54)
●A subject can be shot under various types of lighting conditions indoors (natural, fluorescent, candlelight, etc.). Because the color temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. Use this function for a more natural result.
●Once you adjust white balance manually, the setting is retained even if the power is turned off or the battery removed.